Behringer UP1000 manual Cleaning the Reflector, Suspended Installation, Specifications

ULTRAPAR UP1000

5. CLEANING THE REFLECTOR

sDisconnect the spotlight from the mains and remove the lamp casing as described in chapter 2.1.

sRemove the color frame (chapter 4), the protective mesh and lens (chapter 3.1), so that the reflector is easily accessible.

sCleaning the reflector: Use oil-free compressed air or a soft, lint-free cotton cloth. Tenacious stains can be removed by adding some mild soap water, however, don’t forget to remove all soap water remnants as well!

sRemount the spotlight (see chapters 2.1 and 3.2).

+Never clean the reflector with commercial window cleaners, as the chemical substances contained in these agents can damage the reflective coating!

+Don’t use paper towels or other material with a rough surface to wipe the reflector clean, so as to avoid scratches damaging the reflector surface.

6. SUSPENDED INSTALLATION

Use the mounting bracket to attach your spotlight to a stand or truss. Always use steel screws with a diameter of approx. 12 mm to fasten the spotlight. Your UP1000 must be secured with an additional safety steel cable . Use the steel cable fixed to the spotlight casing (eyelet ). Once

the spotlight has been adjusted, it must be secured in place with the locking screw .

7. SPECIFICATIONS

Power	575 W max. (220 V / 240 V)
Max. room temperature	Ta = 45°C
Max. temperature of exterior
surfaces	Tmax = 175°C
Dimensions (Height * Diameter)	approx. 11 3/4" (300 mm) * 9 1/4" (237 mm)
Weight	approx. 3.2 kg

BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without further notice. Specifications and appearance may differ from those listed or shown.

6 7. SPECIFICATIONS