14X32 DIGITAL MIXER Preliminary User Manual

2.3Display and Monitoring

(18)

(19)

(20)

(21)

(24)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(25)

(26)

(27)

VIEW

VIEW

(15)

(16)

(17)

(22)

 

 

(23)

(15)PUSH ENCODERS – These 6 controls adjust the parameters presented at the bottom of the Main Display. The editable function will show a circular icon in the display when continuous control is available. The function will show a broad rectangular icon to indicate that a switch or toggle can be accessed by pushing the encoder.

(16)LAYER BUTTONS – Some screens in the Main Display have more than

6 editable parameters which can be accessed by pressing the Layer Up or Down buttons.

(17)PAGE SELECT BUTTONS – Use these to scroll through the available screens or to confirm/decline certain actions.

(18)MAIN/SOLO METERS – The main stereo output level is displayed here along with the solo level of all channels whose Solo button is active.

(19)CATEGORY SELECT BUTTONS – Press one of these buttons to jump directly to the subject you wish to edit or configure.

(20)MONITOR LEVEL – Adjust the level of the Monitor outputs with this knob.

(21)PHONES LEVEL – Adjust the volume of the headphone outputs, located inside the left and right side caps.

(22)MONITOR MONO – Press this button to monitor the audio in mono.

(23)DIM – Press this button to reduce the monitor volume. Press the View button to adjust the amount of attenuation along with all other monitoring-related functions.

(24)LAMP INPUT – Connect a standard 12 V, 5 Watt gooseneck lamp here.

(25)TALKBACK INPUT – Connect a talkback mic via standard XLR cable to this input.

(26)TALK LEVEL – Adjust the level of the talkback mic with this knob.

(27)TALK A/B – Select the destination for the talkback mic signal with these buttons. Press the View button to edit the talkback routing for A and B.