64X32 DIGITAL MIXER Preliminary User Manual

7.13.3Scenes Screen: Parameter Safe Tab

The scenes screen’s “parameter safe” tab configures which console parameters are and are not saved/switched with the console scenes. This is very useful when the operator has certain parameters that they wish to remain in control of, and would never want to have altered during a scene change, for example, the mic pre gains on the input channels.

To adjust the various settings on the Parameter Safe tab, perform the following steps:

1.Rotate any of the first 4 encoders to navigate among the checkboxes in the color screen, which represent various console areas that can be isolated from scene changes.

2.Tap any of the first 4 encoders to select the console areas that have been selected with the encoders. In each of the four columns, multiple console areas can be selected and isolated from scene changes.

The following areas of the console can be isolated from scene changes, and are divided up into 4 columns on the color screen:

Column 1: Input Channels

•HA (Head Amp/Microphone Preamp)

•Configuration

•Channel Equalizer

•Channel Gate/Compressor

•Channel Insert

•Channel Groups

•Fader, Pan, Mute, Mix Ons

Column 2: Input Channels

•Mix sends 1-16

Column 3: Mix Buses

•Mix sends 1-16

•Configuration

•Equalizer

•Compressor

•Insert

•Groups

•Fader, Pan, Mute, Matrix Ons Column 4: Console

•Configuration

•Solo

•Routing

•Output Patch

7.13.4 Scenes Screen: Channel Safe Tab

The scenes screen’s “channel safe” tab configures which console channels are and are not changed when a console scene change occurs. This allows the user to “protect” certain channels from ever changing during a scene change, giving them as much control as possible for key audio sources.

For example, in a theater context, the console operator may have dialed in just the right EQ and compressor settings and channel volume for the voice of the lead actor, and does not wish to have them altered when the console changes scenes and alters various parameters.

To adjust the various settings on the Channel Safe tab, perform the following steps:

1.Rotate any of the 6 encoders to navigate among the check boxes in the color screen, which represent various groups of channels that can be isolated from scene changes.

2.Tap any of the 6 encoders to select the console areas that have been highlighted with the encoders. In each of the 6 columns, multiple console areas can be selected and isolated from scene changes.

The following areas of the console can be isolated from scene changes, and are divided up into six columns on the color screen:

Column 1: Channels

•Input Channels 1-16 Column 2: Channels

•Input Channels 17-32 Column 3: Buses

•Aux 1-8

•FX 1L through 4R

Column 4: Returns

•Mix 1-16

Column 5: Main/Matrix/Groups

•Matrix 1-6

•LR Bus

•Center/Mono Bus

•DCA groups 1-8

Column 6: Effects Slots

•FX 1-8