Turning on the TV and Setting the Channels

6.2-Turning on the TV and Setting the Channels

LANGUAGE menu displays when you turn on your television for the first time. Using the Right/Left movement buttons, select the desired language. Then, the COUNTRY SELECTION menu will be displayed. Select the country by using Up/Down, Left/Rightmovement buttons and press OK button to start the auto programming. Channel Searchmenu will be displayed and digital channels are scanned and stored in the memory. After completion of the searching process Channel Search Results menu will be displayed. Number of TV and Radio channels already detected and stored in the memory at the end of the search process will be displayed in this menu. Finish the Digital channel searching process by pressing the OK button.

PRESS OK KEY TO START ANALOGUE SEARCH PRESS MENU KEY TO EXIT message will be displayed. You can make Analogue channel tuning with OK button

or finish the searching process by pressing the MENU button.

6.3-Performing Digital Tunings

You can either tune the Digital programs automatically or manually and store them in your television.

6.3.1-Automatic Tuning of Channels and Storing in the Memory

Press AV button on your remote control, select DIGITAL tab from the SOURCE menu by using Up/Down movement buttons and confirm by pressing the OK button. Your TV will switch to Digital mode. Press MENU button, MAIN MENU will be displayed. Select SETUP tab with Down movement button and confirm with the OK button. SETUP menu will be displayed.

SETUP

AUTO TUNING

MANUAL TUNING

FIRST TIME INSTALLATION

Select AUTO TUNING tab and confirm by pressing the OK button. COUNTRY SELECTION menu will be displayed.

COUNTRY SELLECTION

BELGIUM	NETHERLANDS
CZECH REP	NORGE
DANMARK	ÖSTERREICH
DEUTSCHLAND	POLSKA
ELLADA	PORTUGAL
ESPANA	SCHWEIZ
FRANCE	SUOMI

HUNGARY SVERIGE

IRELANDA TÜRKİYE

ITALIAU.K.

..........................

START AUTOPROGRAMMING

MENU BACK

Select the country by using Up/Down, Left/Rightmovement buttons and press OK button to start the auto programming. Channel Searchmenu will be displayed and digital channels are scanned and stored in the memory.

Note: You can also assess AUTO TUNING menu from the Complete Channel Search tab in the System Menu under Digital Features menu.

6.3.2-Manual tuning of channels and storing in the memory

In digital mode: Press MENU button, MAIN MENU will be displayed. Select SETUP tab with Down movement button and confirm with the OK button. SETUP menu will be displayed. Select MANUAL TUNING tab and confirm by pressing the OK button. Manual Search Parameters menu will be displayed.