9.2.3-PC Setting
Enter into the SETUP menu from the Main Menu by pressing the MENU button in the PC mode. In order to make the necessary settings in this menu, you can use the P+/P-
/
Horizontal position setting
9.2.6-CLOCK
This is the pixel clock frequency. User can narrow down or enlarge the display by selecting a desired value.
9.2.7-PHASE
Using the
9.2.8-AUTOCONFIGURATION
The most suitable geometric settings in accordance with the entry mode are configured by this function. For this operation, select the AUTOCONFIGURATION tab and press OK button. You can adjust the volume level of the source you have connected to the
Note: In the Monitor mode, you can make the Brightness, Contrast, Sharpness, Red, Green and Blue Settings from the PICTURE menu.
ANT IN
ANT OUT
Scart 1 TV IN/OUT | Scart 2 AUX IN |
DIGITAL SATALLITE RECEIVER
ANT IN | ANT OUT |
SCART Socket
VIDEO RECORDER
ANT IN | socket | |
SCART | ||
|
REAR OF THE TELEVISION
10 Help and tips
The television does not function
Make sure that the power cable of the television is connected to the mains and the power
Poor picture quality
•Is the aerial cable connected?
•If you are using a satellite aerial, has the aerial been adjusted to receive broadcast in the best way?
•Make sure that the aerial is far from devices that emit electromagnetic waves. (Neon lights, loudspeakers etc.)
•Try changing the direction of the external aerial. High buildings and mountains can cause a faded picture or ghosting (double picture).
•The picture quality can be affected when two external devices are connected. Try disconnecting one of the devices.
•Try adjusting the fine tuning.
No picture
•Is the aerial connected correctly?
•Is there any damage to the aerial cable?
•Are the plugs on the aerial cable connected correctly?
•Are you sure that you have pressed the correct button on the remote control?
No sound
22
