6Performing the initial power-on settings

6.1-TV controls

6.1.1-Temporary on/off (STAND-BY)

When you press the red STANDBY button on your remote control while

your television is switched on, the sound and the picture will go off.

In the stand-by mode, the power indicator of your television will glow brighter. To switch your television

back on, either press any numeric button or PR+/PR- buttons.

Caution! If you are not going to use your television for a long time, unplug its power cable from the socket.

6.1.2-Program selection

You may switch to the previous or next program by pressing the P-/P+

buttons located on your television and your remote control. You may enter

the number of the program you would like to select using the numerical buttons. For example, to switch

to the program number 12, press respectively the numeric buttons 1 and 2 on your remote control. You can perform the program selection

also from the Program Table. See page 9 for the program table.

6.1.3-Digital TV, Analogue TV and AV Mode Selection

Press the AV button on your remote control. SOURCE menu will be displayed. Select DIGITAL, ANALOGUE or desired AV mode with Up/Down movement buttons and confirm with OK button so that your television will switch to the source you have selected.

6.1.4-Temporary sound mute (MUTE)

To temporarily mute the sound of your television, press the MUTE button on your remote control. In

that case, MUTE symbol will appear on the screen. When you press the

same button a second time, the sound will be restored. If you press the VOL+ button while in the Mute mode, the sound level is increased and the Mute function is aborted.

6.1.5-Returning to Selected Program (SWAP)

Allows you to switch between the current program you watch and the

last selected program. For example, if you change the channel to Program

11 while you were watching Program 1, press SWAP button to switch back to Program

1.Press SWAP button to switch back to Program 11 again.

PR 01 PR 11 PR 01

6.1.6-Main Menu

Press the MENU button. The Menu including all the setting menus will appear on the screen. Navigate

through the Menu titles with the Up /

Down movement buttons and press

the OK button to select the desired

menu. If you want to exit the menu in any step, or return to the previous menu while you are in a sub menu,

just press the BACK or MENU button.

MAIN MENU

PICTURE

SOUND

PROGRAM TABLE

SETUP

FEATURES

SELECT MENU

EXIT

10

Page 12
Image 12
Beko 15LB250MID operating instructions Performing the initial power-on settings, TV controls