Canon SX60 Format DPON=Direct power-on setting parameter：ＩＤ Parameter, Dpon=On, Range Dpon

User Command Specifications 9. Details of command DPON

Commands	DPON			Mode	Control	Setting	Reference
Function	Direct power-on setting
Format		DPON=<Direct power-on setting parameter：ＩＤ>
Parameter	Direct power-on setting parameters
		Parameter	Meaning
		ON	This sets direct power-on to ON.
		OFF	This sets direct power-on to OFF.				ＩＤ
	The parameters which can be set at any given point in time can be obtained using the
	RANGE command.
	For details, refer to the RANGE command.
Response	"i:OK" is returned if the parameter was set properly.
	For all other responses, refer to "Error List."
Description	This command is used to set direct power-on function to ON or OFF.

(1)It can be executed when the projector is in both the remote mode and power-onstatus at the same time.

However, a "busy" response is given while the zoom or focus lens is being driven.

（Refer to the ZCONTDRV command and FCONTDRV command. ）

(2)This command functions in the same way as when "System settings" - "Direct power-on" are selected on the menu.

(3)Direct power-on cannot be set to ON when "OFF" has been selected as the power management setting.

("e:1004 POWER_MANAGEMENT_OFF" is returned.)

(5)The current direct power-on setting can be obtained using the GET command. For details, refer to the GET command.

Example Setting

> DPON=ON

Direct power-on is set to ON.

< i:OK

Reference

> GET DPON or ?DPON

The current direct power-on setting is obtained.

< g:DPON=ON

Acquisition of parameters which can be set

> RANGE DPON

< r:DPON=I,ON,OFF

"ON" or "OFF" can be set for direct power-on.

*Commands are indicated by ">", and responses are indicated by "<".

Commands

SX50

SX6

SX60

X600

supported

０１．００**

０１．０１**

０１．０１**

０１．０１**

×

○

○

○

When a command is not supported, "e:0002 INVALID_COMMAND" is returned.

Supported Command States

Model

Power supply

Input

Mode

Remarks

OFF

ON

PM

D-RGB

A-RGB1

A-RGB2

Comp

Video

S-Video

D-Video

SCART

None

Remote

Local

SX50

－

－

－

－

－

－

－

－

－

－

－

－

－

－

SX6

×

○

×

○

○

○

○

○

○

○

○

○

○

×

SX60

X600

*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response. *When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.

PAGE 63