Canon SX60, X600 specifications Format RESETReset parameters：ＩＤ, System, All, Reset Lamptime

User Command Specifications 9. Details of command RESET

1

Commands

RESET

Mode Control Setting Reference

Function	Reset
Format		RESET□<Reset parameters：ＩＤ>
Parameter Reset parameters
		Parameter	Meaning
		LAMPTIME	Lamp on time reset		ID
		IMAGE	Current image adjustment	reset
		SYSTEM	Initial system settings
		ALL	Factory settings
Response An ‘i:OK’ is returned when the reset process is successful.
	Furthermore, the internal status established when a response other than the normal response
	("i:OK") has been returned is indeterminate.
	For all other responses, refer to "Error List."
Description This resets the projector settings.

-1 It can be executed when the projector is in both the remote mode and power-onstatus at the same time.

A "busy" response is given while the zoom or focus lens is being driven. (Refer to the ZCONTDRV command and FCONTDRV command.)

-2 What can be specified by the reset parameters for each "reset type" is provided below.

■Reset of lamp on time

(a)The counter indicating the lamp replacement period is reset.

(b)This command is identical to the Reset function under Lamp counter in the System settings menu.

(c)Execute this command after replacing the lamp.

■Current image adjustment reset

(a)The adjustment settings of the currently-selected image mode are initialized.

(b)This command is identical to the Reset function in the Image adj. menu.

※If there is an input signal, the image adjustment items are initialized and then the adjustment values are optimized for the signal.

■Reset of system settings

(a)The following items are initialized.

-Image adjustment items (all image modes)

-Initial settings executed

*For details, refer to 'RESET items' at the end of these specifications.

(b)This command works in the same way as the menu [System settings] - [Initial settings] function.

■Factory settings

(a)The following items are initialized.

- Image adjustment items (all image modes) - Initial settings executed

- Input source <-A-RGB2 - Language <- English

*For details, refer to 'RESET items' at the end of these specifications.

-3 Notes

(a)The power must never be turned off while this command is being executed!

(b)After the 'Factory settings,' be absolutely sure to turn the power off and then restart.

(c)'NO_SIGNAL' may be returned as the response to the command after 'Current image adjustment reset' or 'System initial setting' has been executed.

Example Control
> RESET LAMPTIME	This resets the lamp on time.

<i:OK

*Commands are indicated by ">", and responses are indicated by "<".

Commands	SX50	SX6	SX60	X600
supported	01.00**	01.01**	01.01**	01.01**
	○	○	○	○

Supported Command States

Model

Power

Input

Mode

Remarks

OFF

ON

PM

D-RGB

A-RGB1

A-RGB2

Comp

Video

S-Video

D-Video

SCART

None

Remote

Local

SX50

×

○

×

○

○

○

○

○

○

–

–

○

○

×

SX6

×

○

×

○

○

○

○

○

○

○

○

○

○

×

SX60

X600

*If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.

*"i:BUSY" may be returned if the power status is being switched.

PAGE 47