User Command Specifications ９．Details of command GET RGBOFFSET
1
GET RGBOFFSET
GET RGBOFFSET
GET□RGBOFFSET
?△RGBOFFSET
For all other res
p
onses, refer to
"Error List."
(1)
However, a "busy" response is given while the zoom or focus lens is being driven.
（Refer to the
ZCONTDRV command and FCONTDRV command.
）
(2) The RGB offset can be set using the

RGBOFFSET command

.
> GET RGBOFFSET or ? RGBOFFSET
< g:RGBOFFSET=-10, 0, 19
*Commands are indicated by ">", and responses are indicated by "<".
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
OFF ON PM
－－－
×○×
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
×○○○
０１．００** ０１．０１** ０１．０１** ０１．０１**
Commands
Function
Format
Description
Response
g:RGBOFFSET=<R adjustment value: Number>▽<G adjustment value: Number>▽<B
adjustment value: Number>
SX50 SX6
This command is used to inquire about the current RGB offset adjustment values.
Number
SX60 X600
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
RGB offset adjustment value inquiry
Reference
SettingControlMode
Model Power supply Input Mode
Remote Local Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
SX50 －－－－－－－－－－－
SX6 ○○○○○○○○○○×
Commands
su
pp
orted
Example
SX60
X600
PAGE 95