Canon SX60, X600 6AXR-Y

User Command Specifications 9．Details of command 6AXR-Ｙ

6AXR-Y

6AXR-Y

6AXR=<R hue: Number

▽<R saturation: Number>

6AXG=<G hue: Number>▽<G saturation: Number>

6AXB=<B hue: Number

▽<B saturation: Number>

6AXC=<C hue: Number

▽<C saturation: Number>

6AXM=<M hue: Number>▽<M saturation: Number>

6AXY=<Y hue: Number

▽<Y saturation: Number>

Setting values for hue and color saturation (–20 to 20)

<Hue: Number>▽<Saturation: Number

This sets the 6-axis correction of the hue and color saturation for R to Y.

-1

A "busy" response is given while the zoom or focus lens is being driven.

-2

-3

[Image adjustments] - [Advanced color adjustments] - [6-axis color adjustments]

-4

-5

Setting

> 6AXR=-8, 5

< i:OK

Reference

> GET 6AXR or ?6AXR This retrieves the R hue and color saturation.

g:6AXR=12, -8

Obtain settable parameter range (Min, Max)

> RANGE 6AXC

< r:6AXC=N,-20,20,-20,20

* Commands are indicated by ">", and responses are indicated by "<".

Supported Command State

OFF ON PM

×○×

* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.

* "i:BUSY" may be returned if the power status is being switched.

The R hue is set to –8, and the color saturation is

set to 5.

01.00** 01.01** 01.01** 01.01**

SX50 SX6 SX60 X600

Commands

Function

Parameter

Description

Response

Format

Example

6-axis correction R-Y hue/saturation setting

"i:OK" is returned if the parameter was set properly.

Model

SX50

SX6

These commands take effect when 6-axis adjustment (6AX) has been selected by the

advanced color adjustment command (ACADJUST) or when they have been set to valid using

the 6-axis adjustment command (6AXADJ), and they can be set separately.

Number

For details, refer to the RANGE command.

This command is the same as the menu functions in the table below.

Mode Control Setting Reference

It can be executed when the projector is in both the remote mode and power-on status at the

same time.

The RANGE command can be used to obtain the parameter range that can be set at

that time.

This sets the currently selected input signal and image mode.

The current color adjustment values can be acquired using the applicable GET commands.

SX60

X600

Model Power Input Mode

Remote LocalNone Remarks

D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-VideoSCART

SX50 ○○○○○○––○○×

SX6 ○○○ ○○×○○○○

SX60

X600

○

Any value from -20 to 20 can be set for the hue

and saturation of the C (cyan) color.

Command

supported

For all other responses, refer to "Error List."

(Refer to the ZCONTDRV command and FCONTDRV command.)

[Image adjustments] - [Advanced adjustments] - [6-axis color adjustments] -

[Adjustments]

For details, refer to the GET command.

○○○○

PAGE 45