Canon SX60 GET Ledilluminate, Getledilluminate ?LEDILLUMINATE, Response GLEDILLUMINATE=Setting：ＩＤ

User Command Specifications ９．Details of command GET LEDILLUMINATE

Commands	GET LEDILLUMINATE			Mode	Control	Setting	Reference
Function Emotional LED and signal sensing LED lighting setting inquiry
Format		GET□LEDILLUMINATE
		?△LEDILLUMINATE
Response		g:LEDILLUMINATE=<Setting：ＩＤ>
		Setting	Meaning
		ON	This sets the LED display to ON.				ＩＤ
		OFF	This sets the LED display to OFF.

For all other responses, refer to "Error List."

This command is used to inquire about the current emotional LED and signal sensing LED lighting control Description settings.

(1)This inquiry can be made when the projector is in both the remote mode and power-onstatus at the same time.

However, a "busy" response is given while the zoom or focus lens is being driven.

（Refer to the ZCONTDRV command and FCONTDRV command. ）

(2)LED lighting control can be set using the LEDILLUMINATE command.

Example > GET LEDILLUMINATE or ? LEDILLUMINATE < g:LEDILLUMINATE=OFF

*Commands are indicated by ">", and responses are indicated by "<".

Commands	SX50	SX6	SX60	X600
supported	０１．００**	０１．０１**	０１．０１**	０１．０１**
	×	○	○	○

When a command is not supported, "e:000A INVALID_PARAMETER" is returned.

Supported Command States

Model

Power supply

Input

Mode

Remarks

OFF

ON

PM

D-RGB

A-RGB1

A-RGB2

Comp

Video

S-Video

D-Video

SCART

None

Remote

Local

SX50

ー

ー

ー

ー

ー

ー

ー

ー

ー

-

-

ー

ー

ー

SX6

×

○

×

○

○

○

○

○

○

○

○

○

○

×

SX60

X600

*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response. *When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.

PAGE 117