Canon X600, SX60 specifications HPIX/ Vpix, Range Vpix

User Command Specifications 9. Details of command HPIX/VPIX

1

Commands	HPIX/ VPIX	Mode	Control	Setting	Reference
Function	Horizontal/Vertical resolution adjustment
Format	HPIX=<Horizontal resolution: Number>
	VPIX=<Horizontal resolution: Number>
Parameter Horizontal/vertical resolution
	The RANGE command can be used to obtain the parameter range that can be set at				Number
	that time.
	For details, refer to the RANGE command.
Response "i:OK" is returned if the parameter was set properly.
	For all other responses, refer to "Error List."
Description This adjusts the horizontal and vertical resolution (number of dots) on the screen.

-1 It can be executed when the projector is in both the remote mode and power-onstatus at the same time.

A "busy" response is given while the zoom or focus lens is being driven. (Refer to the ZCONTDRV command and FCONTDRV command.)

Furthermore, it may not be possible to execute the command with some input signals. -2 This command is the same as the menu functions in the table below.

Model	Menu
SX50	[Display settings] - [Input signal settings] - [No. of horizontal display dots]
	[Display settings] - [Input signal settings] - [No. of vertical display dots]
SX6	[Display settings] - [Input signal settings] - [No. of horizontal dots]
SX60
	[Display settings] - [Input signal settings] - [No. of vertical dots]
X600

-3 The GET command can be used to retrieve the current horizontal and vertical position. For details, refer to the GET command.

Example Setting

> HPIX=1024

This sets the horizontal resolution to 1024.

< i:OK

Reference

> GET VPIX or ?VPIX

This retrieves the vertical resolution.

< g:VPIX= 864

Obtain settable parameter range (Min, Max)

> RANGE VPIX

< r:VPIX=N, 0, 1000

Any value from 0 to 1000 can be set for the

horizontal resolution.

* Commands are indicated by ">", and responses are indicated by "<".

Commands

SX50

SX6

SX60

X600

supported

01.00**

01.01**

01.01**

01.01**

○

○

○

○

Supported Command States

Model

Power

Input

Mode

Remarks

OFF

ON

PM

D-RGB

A-RGB1

A-RGB2

Comp

Video

S-Video

D-Video

SCART

None

Remote

Local

SX50

×

○

×

○

○

○

×

×

×

–

–

×

○

×

SX6

×

○

×

○

○

○

×

×

×

×

×

×

○

×

SX60

X600

*If the command cannot be supported, 'INVALID_MODE,' 'NOT_POWER_SUPPLIED' or 'INVALID_SOURCE' is returned as an error response.

*If the necessary signals are not input, 'INVALID_SIGNAL (*****)' or 'NO_SIGNAL' is returned.

*"i:BUSY" may be returned if the power status is being switched.

PAGE 24