Canon SX60, X600 specifications Get Sel, ? SEL Response GSEL=Input signal ID

User Command Specifications 9．Details of command GET SEL

1

Commands	GET SEL			Mode	Control	Setting	Reference
Function	Input signal inquiry
Format	GET□SEL
	?△SEL
Response	g:SEL=<Input signal: ID>
		Input signal	Remarks
		PAL	PAL-M,PAL-N included
		SECAM
		NTSC	NTSC4.43 included
		1080i	540p (1080i non-interlaced signals) included
		1035i
		720p					ID
		575p
		480p
		575i	288p (PAL system non-interlaced signals) included
		480i	240p (NTSC system non-interlaced signals) included
		UNKNOWN	No-color, 1080p, and other signals
	For all other responses, refer to "Error List."
Description This inquires about the current input signals.
	-1 This inquiry can be made when the projector is in both the remote mode and power-onstatus at
	the same time.
	A "busy" response is given while the zoom or focus lens is being driven.
	（Refer to the ZCONTDRV command and FCONTDRV command.）
	With some input signals, it may not be possible to make this inquiry.
	-2 The input signals can be selected by the SEL command.

Example > GET SEL or ? SEL

<g:SEL=575p

*Commands are indicated by ">", and responses are indicated by "<".

Commands	SX50	SX6	SX60	X600
supported	01.00**	01.01**	01.01**	01.01**
	○	○	○	○

Supported Command States

Model

Power

Input

Mode

Remarks

OFF

ON

PM

D-RGB

A-RGB1

A-RGB2

Comp

Video

S-Video

D-Video

SCART

None

Remote

Local

SX50

×

○

×

×

×

×

○

○

○

–

–

×

○

×

SX6

×

○

×

×

×

×

○

○

○

×

×

×

○

×

SX60

X600

*If the command cannot be supported, 'INVALID_MODE,' 'NOT_POWER_SUPPLIED' or 'INVALID_SOURCE' is returned as an error response.

*If the necessary signals are not input, 'INVALID_SIGNAL (*****)' or 'NO_SIGNAL' is returned.

*"i:BUSY" may be returned if the power status is being switched.

PAGE 81