Canon X600 Blank, Function, Format BLANK=BLANK parameter：ＩＤ Parameter, Response, Description

User Command Specifications ９．Details of command BLANK

Commands	BLANK			Mode	Control	Setting	Reference
Function	BLANK function
Format		BLANK=<BLANK parameter：ＩＤ>
Parameter	BLANK parameters
		Parameter	Meaning
		ON	BLANK ON
		OFF	BLANK OFF				ＩＤ
	The parameters which can be set at any given point in time can be obtained using the
	RANGE command.
	For details, refer to the RANGE command.
Response	"i:OK" is returned if the parameter was set properly.
	For all other responses, refer to "Error List."
Description	This command is used to set the BLANK function.

(1)This command functions only when the projector is in the "remote mode ." It cannot be executed by a menu operation or button operation.

However, a "busy" response is given while the zoom or focus lens is being driven.

（Refer to the ZCONTDRV command and FCONTDRV command. ）

(2)Only a black screen is displayed.

(3)No input signals and none of the on-screen displays appear while BLANK is underway.

(4)The “display setting,” "image adjustment" and other commands can be executed even while BLANK is underway.

However, the “AUTOSETEXE=FOCUS” and “AUTOSETEXE=SCRN” commands cannot be executed. Refer to the AUTOSETEXE command.

(5)The BLANK function is released in the following situations.

a.When the POWER button on the remote control or panel has been pressed

b.When power management standby countdown has started

c.When the mode has been switched from remote to local

d.Power Off

(6)The current BLANK settings can be obtained using the GET command. For details, refer to the GET command.

Example Setting
	> BLANK=ON				BLANK is set to ON.
	< i:OK
	Reference
	> GET BLANK or ?BLANK				The current BLANK status is referenced.
	g:BLANK=ON
	Acquisition of parameters which can be set
	> RANGE BLANK
	< r:BLANK=I, OFF, ON
	*Commands are indicated by ">", and responses are indicated by "<".
Commands	SX50	SX6	SX60	X600
supported	０１．００**	０１．０１**	０１．０１**	０１．０１**
	×	○	○	○
	When a command is not supported, "e:0002 INVALID_COMMAND" is returned.

Supported Command States

Model

Power supply

Input

Mode

Remarks

OFF

ON

PM

D-RGB

A-RGB1

A-RGB2

Comp

Video

S-Video

D-Video

SCART

None

Remote

Local

SX50

－

－

－

SX6

×

○

×

○

○

○

○

○

○

○

○

○

○

×

SX60

X600

*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.

PAGE 18