User Command Specifications

9. Details of command GUID

Commands

GUIDE

 

 

Mode

Control

Setting

Reference

Function

Guide setting

 

 

 

 

 

 

 

 

 

 

Format

 

GUIDE=<Guide setting parameter:ID>

 

 

 

 

 

 

Parameter

Guide setting parameters

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Parameter

Meaning

 

 

 

 

 

 

 

 

ON

Guide display ON

 

 

 

 

 

 

 

 

OFF

Guide display OFF

 

 

 

 

 

ID

 

The parameters which can be set at any given point in time can be obtained using the

 

 

 

 

 

RANGE command.

 

 

 

For details, refer to the RANGE command.

 

 

 

 

 

 

 

 

 

Response

"i:OK" is returned if the parameter was set properly.

 

For all other responses, refer to "Error List."

 

 

Description

This command is used to set the guide function display to ON or OFF.

(1)It can be executed when the projector is in both the remote mode and power-onstatus at the same time.

However, a "busy" response is given while the zoom or focus lens is being driven.

Refer to the ZCONTDRV command and FCONTDRV command.

(2)This command functions in the same way as when "System settings" - "Guide" are selected on the menu.

However, the guide is cleared immediately when "GUIDE=OFF" is received while the guide is displayed.

(3)The current guide setting can be obtained using the GET command. For details, refer to the GET command.

Example Setting

 

> GUIDE=ON

The guide display is set to ON.

< i:OK

 

Reference

 

> GET GUIDE or ?GUIDE

The guide display setting status is obtained.

< g:GUIDE=ON

 

Acquisition of parameters which can be set

> RANGE GUIDE

< r:GUIDE=I, OFF, ON

 

 

*Commands are indicated by ">", and responses are indicated by "<".

Commands

SX50

SX6

SX60

X600

 

 

 

 

 

 

 

 

 

 

 

 

supported

01.00**

01.01**

01.01**

01.01**

 

 

 

 

 

 

×

 

 

 

 

When a command is not supported, "e:0002 INVALID_COMMAND" is returned.

Supported Command States

Model

Power supply

 

 

 

 

Input

 

 

 

 

Mode

Remarks

 

OFF

ON

PM

D-RGB

A-RGB1

A-RGB2

Comp

Video

S-Video

D-Video

SCART

None

Remote

Local

 

SX50

 

SX6

×

×

×

 

SX60

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

X600

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response. *When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.

PAGE 62

Page 70
Image 70
Canon X600, SX60 specifications Format GUIDE=Guide setting parameter:ID Parameter, Guide=On, Range Guide