Setting MAIN OVEN controls
Setting MINUTE Timer
The TIMER ON.OFF pad controls the Minute Timer feature. The Minute Timer serves as an extra timer in the kitchen that will beep when the set time has run out. It does not start or stop cooking. The Minute Timer feature can be used during any of the other oven control functions. Refer to “Minimum and Maximum Control Pad Settings” for time amount settings.
To set the Minute Timer (example for 5 minutes)
1.Press TIMER ON.OFF.
2.Press the number pads to set the desired time in the display.
3.Press START. The time will begin to count down with “5:00” and “Timer” will stay in the display. Note:
If START is not pressed the timer will return to the time of day after 25 seconds.
4.When the set time has run out, “End” and “Timer” will show in the display. The clock will sound with 3 beeps every 5 seconds until TIMER ON.OFF is pressed.
To cancel the Minute Timer before the set time has run out
1.Press TIMER ON.OFF. The display will return to the time of day.
Setting Lockout Feature
The 
pad controls the Lockout feature. The Lockout feature automatically locks the oven door and prevents the oven from being turned on. It does not disable the clock, Minute Timer or the interior oven lights.
To activate the Oven Lockout feature
1.Press and hold 
for 3 seconds.
2.After 3 seconds a beep will sound, “Loc” will appear and “DOOR LOCKED” will flash in the display.
Once the oven door is locked the “DOOR LOCKED” indicator will stop flashing.
To reactivate normal oven operation:
1. | Press and hold |
| for 3 seconds. A beep will |
| |||
| |||
| sound. “LOC” will disappear. The “DOOR LOCKED” | ||
| will flash in the display until the oven door has | ||
| completely unlocked. | ||
2. | The oven is again fully operational. | ||
Setting Silent Control Operation
The DELAY START and SELF CLEAN pads control the Silent Control operation feature. The Silent Control operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.
To change control from normal sound operation to silent control operation
1.To tell if your range is set for normal or silent operation press and hold DELAY START for 7 seconds.
2.Press SELF CLEAN to switch between normal sound operation and silent operation mode. The display will show either “SP” or “-
If “-
3.Press START to accept the change or press CANCEL to reject the change.
Note: The control will always beep at the end of a minute timer and will beep when a set temperature has been reached, even if the control is set to silent operation.
Setting Temperature Display — Fahrenheit or Celsius:
The BROIL and SELF CLEAN pads control the Fahrenheit or Celsius temperature display modes. The oven control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display in Fahrenheit.
To change display from Fahrenheit to Celsius or Celsius to Fahrenheit
1.To tell if the display is set for Fahrenheit or Celsius press BROIL and hold it for 7 seconds; “550°” will appear and “BROIL” will flash in the display and a beep will sound. If “F” appears, the display is set to show temperatures in Fahrenheit. If “C” appears, the display is set to show temperatures in Celsius.
2.Press SELF CLEAN to switch between Fahrenheit or Celsius display modes. The display will show either “F” or “C”.
3.Press START to accept the change or press CANCEL to reject the change.
15
