Frigidaire FPDF4085KF setting surface controls, Placement of Burner Bases and Caps

Models: FPDF4085KF

1 36
Download 36 pages 13.15 Kb
Page 10
Image 10
setting surface controls

setting surface controls

Placement of Burner Bases and Caps

Your Cooktop is equipped with three different sizes of burners: Power Burner, Standard Burner and Simmer Burner.

Place the burner base over each gas opening, matching the burner base size with the gas opening size. Place the burner cap on each burner base, again matching the cap size to the burner base size. The cap for each burner has an inner locating ring which locates the burner cap in the center of the burner.

Make sure each burner cap is properly aligned and level.

Turn the burner on to determine if it will light. If the burner does not light, contact a Service Center. Do not service the sealed burner yourself.

BurnerPlacement of Burner Bases and CapsCap

Burner Pan

Burner

BaseGasPlacement of Burner GratesGrateManual background

Opening Manual background

ElectrodeManual background

Placement of Burner Grates

Place grate over burner pans. Make sure that the groove under grate fits over the raised lip of the burner pan. The rounded corners of the grates should be placed toward the front of the cooktop for the front burners and the rear of the cooktop for the back burners.

Grate

Burner pan

lip

Cooktop

Surface

10

Page 10
Image 10
Frigidaire FPDF4085KF setting surface controls, Placement of Burner Bases and Caps, Placement of Burner Grates