Canon X600, SX60 specifications Range

User Command Specifications 2. Communication Specifications

Commands

Transmission format

Type

Null

Control

Setting

Reference

Request transmissions sent from PC to the projector

△<Command character strings> △<Delimiters>

<Command character	Character strings consisting of 0 or more alphanumeric			Reference	Command List
strings>	characters
<Delimiters>	One of CR (0Dh), LF (0Ah), CR+LF (0Dh+0Ah), Null (00h)
Type			Description			Response
	Commands with a command character string length of 0. No command					■ OK
	processing is performed.
Null Commands						□ BUSY
	<Null command character string>:= <Character string with length					■ WARN
Character string
	0>					■ ERR
						□ GET
						□ RANGE
	Projector control command. The format is shown below.					■ OK
Control command						■ BUSY
	<Control command character string>:= <Control					■ WARN
Character string	□	<Parameter value>				■ ERR
	name>					□ GET
						□ RANGE
	Command that sets values for each parameter. The format is shown below.					■ OK
Setting command						■ BUSY
	<Setting command character strings>:= <Parameter					■ WARN
Character string	△ △					■ ERR
	name>	= <Parameter value>
	For the definition of <Parameter value>, refer to "Parameter definitions."					□ GET
						□ RANGE
	Requests current value of each parameter. The format is shown below.					□ OK
						■ BUSY
	<Reference command character string>:=? △<Parameter name>					■ WARN
	GET□<Parameter name>					■ ERR
Reference						■ GET
						□ RANGE
command	Requests range which can be set for each parameter. The format is shown					□ OK
Character string	below.
						■ BUSY
	<Range request command character string>:=					■ WARN
	□		<Parameter name>			■ ERR
	RANGE					□ GET
						■ RANGE

PAGE 3