Canon X600, SX60 Vks/Hks, Format VKS=Vertical keystone distortion value Number, Range HKS

User Command Specifications 9. Details of command VKS/HKS

1

Commands

VKS/HKS

Mode

Control

Setting

Reference

Function

Vertical/Horizontal keystone setting

Format

VKS=<Vertical keystone distortion value: Number>

HKS=<Horizontal keystone distortion value: Number>

Parameter

Vertical/horizontal keystone distortion values

The RANGE command can be used to obtain the parameter range that can be set at

Number

that time.

For details, refer to the RANGE command.

Response

"i:OK" is returned if the parameter was set properly.

For all other responses, refer to "Error List."

Description

This sets the vertical and horizontal keystones.

-1

It can be executed when the projector is in both the remote mode and power-onstatus at the

same time.

A "busy" response is given while the zoom or focus lens is being driven.

(Refer to the ZCONTDRV command and FCONTDRV command.)

-2

This command is identical to pressing the “KEYSTONE” button on the remote control or front pa

-3

The settable keystone range varies depending on the input signal, screen size, number of

-4

horizontal and vertical dots, and other factors.

Changing the vertical keystone value modifies the setting range of the horizontal keystone

-5

value, and changing the horizontal keystone value modifies the setting range of the vertical

Use the “RANGE” command to obtain the range of settable values immediately before setting

-6

the vertical value and horizontal value.

The GET command can be used to obtain the current vertical/horizontal keystone value.

For details, refer to the GET command.

Example

Setting

> VKS=-23

This sets the vertical keystone to –23.

< i:OK

> HKS=10

This sets the horizontal keystone to 10.

< i:OK

Reference

> GET VKS or ?VKS

This retrieves the vertical keystone.

< g:VKS=-23

> GET HKS or ?HKS

This retrieves the horizontal keystone.

< g:HKS=-23

Obtain settable parameter range (Min, Max)

> RANGE HKS

< r:HKS=N,-30,30

Any value from -30 to 30 can be set for the horizontal

keystone distortion.

* Commands are indicated by ">", and responses are indicated by "<".

Commands

SX50

SX6

SX60

X600

supported

01.00**

01.01**

01.01**

01.01**

○

○

○

○

Supported Command States

Model

Power

Input

Mode

Remarks

OFF

ON

PM

D-RGB

A-RGB1

A-RGB2

Comp

Video

S-Video

D-Video

SCART

None

Remote

Local

SX50

×

○

×

○

○

○

○

○

○

–

–

×

○

×

SX6

×

○

×

○

○

○

○

○

○

○

○

○

○

×

SX60

X600

*If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.

*If the necessary signals are not input, 'NO_SIGNAL' is returned.

*"i:BUSY" may be returned if the power status is being switched.

PAGE 48