Canon X600, SX60 specifications Ledilluminate=On, Range Ledilluminate

User Command Specifications ９．Details of command LEDILLUMINATE

Commands	LEDILLUMINATE			Mode	Control	Setting	Reference
Function	Emotional LED and signal sensing LED lighting control
Format		LEDILLUMINATE=<LED lighting control setting parameter：ＩＤ>
Parameter	LED lighting control setting parameters
		Parameter	Meaning
		ON	This sets the LED display to ON.
		OFF	This sets the LED display to OFF.				ＩＤ
	The parameters which can be set at any given point in time can be obtained using the
	RANGE command.
	For details, refer to the RANGE command.
Response	"i:OK" is returned if the parameter was set properly.
	For all other responses, refer to "Error List."
Description	This command is used to control the lighting of the emotional LED and signal sensing LED.

(1)It can be executed when the projector is in both the remote mode and power-onstatus at the same time.

However, a "busy" response is given while the zoom or focus lens is being driven.

（Refer to the ZCONTDRV command and FCONTDRV command. ）

(2)This command functions in the same way as when "System settings" - "LED illumination" are selected on the menu.

(3)The current LED illumination setting can be obtained using the GET command. For details, refer to the GET command.

Example Setting

> LEDILLUMINATE=ON

The LED display is set to ON.

< i:OK

Reference

> GET LEDILLUMINATE or ?LEDILLUMINATE

The ON or OFF setting for the LED display is

< g:LEDILLUMINATE=ON

obtained.

Acquisition of parameters which can be set

> RANGE LEDILLUMINATE

< r:LEDILLUMINATE=I, ON, OFF

"ON" or "OFF" can be set for the LED display.

*Commands are indicated by ">", and responses are indicated by "<".

Commands

SX50

SX6

SX60

X600

supported

０１．００**

０１．０１**

０１．０１**

０１．０１**

○

○

○

When a command is not supported, "e:0002 INVALID_COMMAND" is returned.

Supported Command States

Model

Power supply

Input

Mode

Remarks

OFF

ON

PM

D-RGB

A-RGB1

A-RGB2

Comp

Video

S-Video

D-Video

SCART

None

Remote

Local

SX50

－

－

－

－

－

－

－

－

－

－

－

－

－

－

SX6

×

○

×

○

○

○

○

○

○

○

○

○

○

×

SX60

X600

*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response. *When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.

PAGE 64