Troubleshooting

correctly.

Test the Internet connection to make sure that it is working.

Make sure that the BD-Live Internet Access op- tion is not set to Prohibit Access.

Make sure that the disc your are playing is a legal copy.

After connecting to the Internet, I cannot down- load a file

Erase BD Storage.

Make sure that the internet connection is work- ing.

Try a different USB flash drive.

File was downloaded, but playback from file pauses

Make sure that the USB flash drive is a USB 2.0 de- vice. Using a USB1.1 device may cause pausing.

Try a different USB flash drive.

There is no picture.

Check that the TV is operating correctly.

Check the connections.

Select the AV input assigned to the unit on the TV.

Replace the HDMI cable with a better one. A bad HDMI cable can cause loss of video.

The picture is of poor quality (with snow or lines).

• Check the connections.

There is no sound or the sound is of poor quality.

Check the connections.

Make sure the speakers are connected.

Make sure the MUTE function is not on.

No surround sound.

Check to see if system is actually in full Surround mode (see Audio setting & Speaker setting on page 22, 23). For AUX/TUNER/OPTICAL mode, press the SURROUND button on the remote control - the front panel display should indicate the current setting (STEREO or CH 5.1). If current setting is STEREO, the surround speakers and center speaker will be inactive. Press / button to change surround mode from STEREO. Note: Not all discs, media files, or audio sources provide surround audio, thus lack of audio to surround speakers may be due to the actual source being played.

I can’t find my file in the JPEG listing.

• Make sure the file name is valid.

The remote control does not work or works only intermittently.

Check that batteries are inserted or change them.

Aim the remote control at the unit. The infrared beam must not be blocked or interrupted.

Check that the remote control is configured to control the device you are trying to operate with it.

The subtitles do not appear.

Check that the BD/DVD disc provides subtitles.

Refer to the section on how to display subtitles.

The disc menu language is not the correct one.

The disc menu language has not been set up.

The language of your choice is not available on the disc.

- 26 -

Page 27
Image 27
RCA RTB1013 user manual Troubleshooting