Connections and Setup

Connecting the Speakers

Speaker wires are color-coded to match the terminals. Connect the speaker wire from the back of each speaker to the corresponding color terminal at the back of the unit. Press down the tab to open the terminal and insert the wire. Release the tab to lock wire in the terminal.

Center Speaker

 

Front Speakers

Subwoofer

Right

Left

 

 

Green and Black

 

 

 

Red and

White and Black

Purple and Black

Black

 

Insert

Press

Gray and Black

Blue and Black

Release

RightLeft

Rear Speakers

(Surround Sound)

To adjust each speaker volume level for optimum listening experience.

(1)Press LEVEL button on the remote control to select FL (front Left speaker).

(2)Press or buttons to adjust the value up or down (between -10dB and +10dB).

(3)Repeat step (1) and (2) for the other speakers FR, CT, SW, SL, SR.

Speaker gains may be set to levels of up to +10dB, actual max levels may also depend on your Volume Setting.

Note:

When connecting the speakers, make sure the polarities (“+” speaker wire to “+” on the receiver) of speaker wires and terminals match. For example, red wire to red terminal on the receiver. If the cords are reversed, the sound will be distorted. Do not let the speaker wires touch each other, it will damage the system’s amplifier.

- 8 -

Page 9
Image 9
RCA RTB1013 user manual Connecting the Speakers, Insert, Release