Canon SX60, X600 specifications Hpos/Vpos, Range Hpos

User Command Specifications 9. Details of command HPOS/VPOS

1

Commands	HPOS/VPOS	Mode Control	Setting	Reference
Function	Horizontal/Vertical position adjustment
Format	HPOS=<Horizontal position: Number>
	VPOS=<Vertical position: Number>
Parameter Horizontal/vertical positions
	The RANGE command can be used to obtain the parameter range that can be set at			Number
	that time.
	For details, refer to the RANGE command.
Response "i:OK" is returned if the parameter was set properly.
	For all other responses, refer to "Error List."
Description This adjusts the horizontal and vertical position on the screen.

-1 It can be executed when the projector is in both the remote mode and power-onstatus at the same time.

A "busy" response is given while the zoom or focus lens is being driven. (Refer to the ZCONTDRV command and FCONTDRV command.)

Furthermore, it may not be possible to execute the command with some input signals. -2 This command is the same as the menu functions in the table below.

Model	Menu
SX50	[Display settings] - [Input signal settings] - [Horizontal position]
	[Display settings] - [Input signal settings] - [Vertical position]
SX6	[Display settings] - [Input signal settings] - [Horizontal position]
SX60
	[Display settings] - [Input signal settings] - [Vertical position]
X600

-3 The GET command can be used to retrieve the current horizontal and vertical position. For details, refer to the GET command.

Example Setting

> HPOS=12

This sets the horizontal position to 12.

< i:OK

Reference

> GET VPOS or ?VPOS

This acquires the vertical position.

< g:VPOS=8

Obtain settable parameter range (Min, Max)

> RANGE HPOS

< r:HPOS=N, 0, 820

Any value from 0 to 820 can be set for the

horizontal position.

* Commands are indicated by ">", and responses are indicated by "<".

Commands

SX50

SX6

SX60

X600

supported

01.00**

01.01**

01.01**

01.01**

○

○

○

○

Supported Command States

Model

Power

Input

Mode

Remarks

OFF

ON

PM

D-RGB

A-RGB1

A-RGB2

Comp

Video

S-Video

D-Video

SCART

None

Remote

Local

SX50

×

○

×

×

○

○

×

×

×

–

–

×

○

×

SX6

×

○

×

×

○

○

×

×

×

×

×

×

○

×

SX60

X600

*If the command cannot be supported, 'INVALID_MODE,' 'NOT_POWER_SUPPLIED' or 'INVALID_SOURCE' is returned as an error response.

*If the necessary signals are not input, 'INVALID_SIGNAL (*****)' or 'NO_SIGNAL' is returned.

*"i:BUSY" may be returned if the power status is being switched.

PAGE 23