Canon SX60, X600 Autoｓｅｔexe, Commands, Format AUTOSETEXEAuto set parameter：ＩＤ Parameter

User Command Specifications 9.Details of command AUTOＳＥＴEXE

Commands	AUTOＳＥＴEXE			Mode	Control	Setting	Reference
Function Auto setup
Format		AUTOSETEXE□<Auto set parameter：ＩＤ>
Parameter	Auto set parameters
		Parameter	Meaning
		FOCUS	Auto focusing
		VKS	Auto keystone (vertical) execution
		SCRN	Automatic screen color correction
			execution				ＩＤ
		INPUT	Automatic signal sensing execution
	The parameters which can be controlled at any given point in time can be obtained using the
	RANGE command.
	For details, refer to the RANGE command.
Response “i:OK” is returned when the automatic processing was completed successfully.
	One of the following responses is returned if an error has been detected at any part of the auto setup.
		Type	Error response
		FOCUS	e:F002 SYSTEM (FOCUS)
		VKS	e:F004 SYSTEM (AUTO_KEYSTONE)
		SCRN	e:F005 SYSTEM (SCREEN_COLOR)

For all other responses, refer to "Error List."

Description This command is used to execute auto setup.

(1)It can be executed when the projector is in both the remote mode and power-onstatus at the same time.

However, a "busy" response is given while the zoom or focus lens is being driven.

（Refer to the ZCONTDRV command and FCONTDRV command. ）

(2)There are no parameters to be executed together. Execute them separately.

(3)It is not possible to execute auto setup in some projector statuses.

Type	Statuses in which auto setup	Remarks
	cannot be executed
FOCUS	Auto setup cannot be executed	Refer to the BLANK
	while "BLANK" is underway.	command.
VKS	－
SCRN	Auto setup cannot be executed	Refer to the BLANK
	while "BLANK" is underway.	command.
INPUT	Auto setup cannot be executed
	if there are no input signals.

(4)When automatic screen color correction (SCRN) has been completed successfully, the screen color correction (WB) is set to "ADJUST."

Example Setting

> AUTOSETEXE FOCUS

Auto focusing is executed.

< I:OK

Acquisition of parameters which can be set

> RANGE AUTOSETEXE

<r:AUTOSETEXE=I, FOCUS, VKS, SCRN, INPUT

*Commands are indicated by ">", and responses are indicated by "<".

Commands

SX50

SX6

SX60

X600

supported

０１．００**

０１．０１**

０１．０１**

０１．０１**

×

○

○

○

When a command is not supported, "e:0002 INVALID_COMMAND" is returned.

Supported Command States

Model

Power supply

Input

Mode

Remarks

OFF

ON

PM

D-RGB

A-RGB1

A-RGB2

Comp

Video

S-Video

D-Video

SCART

None

Remote

Local

SX50

－

－

－

SX6

×

○

×

○

○

○

○

○

○

○

○

○

○

×

SX60

X600

*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.

PAGE 17