Bvol, Format BVOL=Beep sound setting Number | Canon SX60, X600

User Command Specifications

9. Details of command BVOL

1

Commands

BVOL

Mode

Control

Setting

Reference

Function

BEEP sound setting

Format

BVOL=<Beep sound setting: Number>

Parameter

Beep sound setting

Parameter

Meaning

0

BEEP sound mute

1

BEEP sound output

ID

The parameters which can be set at any given point in time can be obtained using the

RANGE command.

For details, refer to the RANGE command.

Response

"i:OK" is returned if the parameter was set properly.

For all other responses, refer to "Error List."

Description

This sets the BEEP sound output.

-1 It can be executed when the projector is in both the remote mode and power-onstatus at the

same time.

A "busy" response is given while the zoom or focus lens is being driven.

(Refer to the ZCONTDRV command and FCONTDRV command.)

-2 This command is identical to the Beep function in the System settings menu.

-3 The beep sound can be set even while the sound is muted, but it will not sound even if (beep

sound output) has been set.

-4 The current beep sound output status can be acquired using the applicable GET command.

For details, refer to the GET command.

Example

Setting

> BVOL=0

This mutes the BEEP sound.

< i:OK

Reference

> GET BVOL or ?BVOL

This retrieves the BEEP sound output state.

< g:BVOL=1

Acquisition of parameters which can be set

> RANGE BVOL

< r:BVOL=I, 0, 1

"0" or "1" can be selected as the beep sound setting.

* Commands are indicated by ">", and responses are indicated by "<".

Commands

SX50

SX6

SX60

X600

supported

01.00**

01.01**

01.01**

01.01**

○

○

○

○

Supported Command States

Model

Power

Input

Mode

Remarks

OFF

ON

PM

D-RGB

A-RGB1

A-RGB2

Comp

Video

S-Video

D-Video

SCART

None

Remote

Local

SX50

×

○

×

○

○

○

○

○

○

–

–

○

○

×

SX6

×

○

×

○

○

○

○

○

○

○

○

○

○

×

SX60

X600

*If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.

*"i:BUSY" may be returned if the power status is being switched.

PAGE 51

Image 59

Canon SX60, X600 specifications Bvol, Format BVOL=Beep sound setting Number

Contents

User Command Specifications Canon projector SX6/SX60/X600 User Commands Version revision history II Contents Range Sharp Range Range PowerGET 6AXADJ GET 6AXR～6AXY GET Lamp GET Noshowstatus Range Rcch Range Guid Range Dpon Description Overview Command sent from the PC Communication Specifications Range OK response character string=iOK Error response character string= eError codeError messageResponse Response character string Delimiter RS RTS CS CTS OtherCable Shield CD DCD RD RXD SD TXD ER DTR SG GND DR DSR Delimiter is considered transmission received Lost, and the mode is reset to receive standby againCommands Communication Flow Command System SX6, SX60 or X600 User Command System ALM Control ModeRemote Local GET Mode Main GET Comver Error Key/Emulation function Local mode Remote mode GET/RANGE Power Management ModeEvents for returning from standby mode ・Signal input Command List Description Details of commandFormat Parameter User Command Specifications SET command User Command Specifications GET command User Command Specifications Range command Function CommandsRemote Switch to Local mode This switches to Local modeGET Romver GET Signalstatus Main GET Mode or ?MODE GMODE=LOCAL Example Control PowerFormat Power Parameter ：ＩＤ Power on Format AUTOSETEXEAuto set parameter：ＩＤ Parameter CommandsExample Setting Autoｓｅｔexe Response BlankFunction Format BLANK=BLANK parameter：ＩＤ Parameter Format INPUT=Input selection parameters ：ＩＤ Input Autopc Autopc Range Ｄｏｔｓ Example SettingDots Format DOTS=Number of dots Number TRACK=25 Format TRACK=Adjustment value NumberParameter Adjustment value Track Range Hpos HPOS/VPOS Range Vpix HPIX/ Vpix SEL Format SEL=Input signal selection parameter ID Range Aspect AspectTrue ASPECT=WIDE Image Supported Command States Range BRI Format BRI=Brightness setting NumberBRI Cont Format CONT=Contrast setting Number SHARP=3 Format SHARP=Sharpness setting NumberSharp Range Gamma Format GAMMA=Gamma adjustment NumberGamma Range Dgamma DgammaOFF DGAMMA=1 OFF Auto Prog Supported Command States WB=NORMAL AdjustNormal Greenboard Wbrgb Adjustment value NumberAn iOK is returned after setting is successful Image adjustments Screen color correction Adjustments Range SAT SAT HUE Format HUE=Hue setting value ：NumberSX50 Image adjustments Hue Range Rgbgain RgbgainExample Range Rgboffset Setting：Number ParameterRgboffset Format Acadjust Example Control Memcadj Range 6AXADJ Format 6AXADJ=6-axis adjustment parameter：ＩＤ Parameter6AXADJ 6AXADJ=ON Range 6AXC 6AXR-Y LAMP=NORMAL Format LAMP=Lamp output setting parameters ：ＩＤLamp System ResetFormat RESETReset parameters：ＩＤ Reset Lamptime Range HKS VKS/HKSFormat VKS=Vertical keystone distortion value Number Avol Format AVOL=Audio volume level Number MUTE=ON MuteMute control Mute control parameter Bvol Format BVOL=Beep sound setting Number IMAGEFLIP=REAR Format IMAGEFLIP=Image flip setting parameters ：ＩＤImageflip PMM=STANDBY Format PMM=Power management setting parameters ：ＩＤPMM PJON=CANON Pjon Blue screen This sets the Blue screen when no signals are inputNosig Black screen Logo NoshowBlack Blue Logopos Lang TERMINAL=IN Format TERMINAL=Terminal setting parameters ：ＩＤTerminal OUT Range Keylock Format KEYLOCK=Key lock setting parameters ：ＩＤKeylock KEYLOCK=RC Range Rcch Format RCCH=Remote control setting parameters ：ＩＤRcch Range Guide Format GUIDE=Guide setting parameter：ＩＤ ParameterGuide GUIDE=ON Range Dpon Format DPON=Direct power-on setting parameter：ＩＤ ParameterDpon DPON=ON Range Ledilluminate LedilluminateLEDILLUMINATE=ON Range Zstepdrv ZstepdrvWide ZSTEPDRV=TELE ZCONTDRV=TELE ZcontdrvGET Romver GET Comver Range Fstepdrv FstepdrvFSTEPDRV=NEAR FCONTDRV=NEAR Fcontdrv Down Commands ModeRemarks Button Menu RC Power iOk Key assignments for the front panel buttons are shown below ＭａｉｎFunction Front panel operation emulation Format Parameter Main unit panel emulation button parameters Format GET Parameter ? Parameter GET GET Mode ? Mode GET Mode Response GPOWER=Power status ID GET PowerGET Power ? Power Response GBLANK=BLANK status：ＩＤ GET BlankGetblank ?BLANK This inquires about the current input selection GET InputGET Input Response GINPUT=Input type ID Response GDOTS=Total number of dots Number GET DotsGET Dots GET Track ? Track Response GTRACK=Tracking adjustment value NumberTracking adjustment value inquiry GET Track ? Vpos GVPOS=Vertical position adjustment value NumberGET HPOS/VPOS GET Hpos GET Vpos ? Hpix ? Vpix Vertical resolution inquiryGET HPIX/VPIX GET Hpix GET SEL ? SEL Response GSEL=Input signal IDGET SEL GET Aspect ? Aspect Response GASPECT=Screen setting ：ＩＤThis inquires about the current screen setting GET Aspect GET Image ? Image Response GIMAGE=Image mode ：ＩＤGET Image ? BRI Response GET BRIGET BRI Response GCONT=Contrast value Number Contrast value setting inquiryContrast can be set by the Cont command GET GET Sharp Sharpness value setting inquiryResponse GSHARP=Sharpness setting Number This inquires about the current sharpness value setting GET Gamma ? Gamma Response GGAMMA=Gamma adjustment value ：NumberThis inquires about the current gamma adjustment value GET Gamma GET Dgamma ? Dgamma Dynamic gamma value setting inquiryResponse GDGAMMA=Setting ID GET Dgamma Response GPROG=Set status value ID GET ProgGET Prog ? WB Response GET WBGET WB GET Wbrgb or ? Wbrgb Screen color correction adjustment inquiryGET Wbrgb GET Wbrgb ? Wbrgb GET SAT ? SAT Response GSAT=Color saturation value setting NumberColor saturation value setting inquiry GET SAT ? HUE Response GET HUEGET HUE Getrgbgain ?RGBGAIN Mode Control SettingFunction RGB gain adjustment value inquiry Format GET Rgbgain Getrgboffset ?RGBOFFSET Function RGB offset adjustment value inquiry FormatGET Rgboffset GET Acadjust or ? Acadjust GACADJUST=6AX GET AcadjustGET Acadjust ? Acadjust Response GACADJUST=Details of adjustment ：ＩＤ Getmemcadj ?MEMCADJ Response GMEMCADJ=Details of adjustment：ＩＤGET Memcadj GET6AXADJ ?6AXADJ Response G6AXADJ=Setting：ＩＤGET 6AXADJ ? 6AXG ? 6AXB ? 6AXC ? 6AXM Axis correction R to Y hue/color saturation setting inquiryGET 6AXR-6AXY GET 6AXR GET 6AXG GET 6AXB GET 6AXC GET 6AXM GET 6AXY GET Lamp Response GLAMP=Setting ：ＩＤGET Lamp GET VKS GET HKS ? VKS ? HKS Response GVKS=Vertical keystone setting NumberVertical/horizontal keystone setting inquiry GET VKS/HKS GET Avol or ? Avol GAVOL=18 Audio volume setting inquiryGET Avol GET Avol GET Mute Mute control setting inquiryResponse GMUTE=Setting ：ＩＤ GET Mute GET Bvol Response GBVOL=Setting ＩＤGET Bvol ? Imageflip Flip display setting inquiryResponse GIMAGEFLIP=Setting ：ＩＤ GET Imageflip GET PMM ? PMM Response GPMM=Setting ：ＩＤ（Refer to the Zcontdrv command and Fcontdrv command ） GET PMM GET Pjon ? Pjon GET Pjon Black screen Response GNOSIG=Setting ：ＩＤGET Nosig GET Nosig GET Noshow ? Noshow Response GNOSHOW=Setting ：ＩＤGET Noshow ? Logopos Response GLOGOPOS=Setting ：ＩＤUser image position can be set by the Logopos command GET Logopos Response GLANG=Language ：ＩＤ GET LangLanguage inquiry GET L ＡＮＧ OUT GET TerminalGET Terminal ? Terminal GET Keylock ? Keylock GET Keylock GET Rcch Remote control setting inquiryResponse GRCCH=Setting ：ＩＤ Setting Meaning Getguide ?GUIDE Response GGUIDE=Setting：ＩＤGET Guide ?DPON Response GDPON=Setting：ＩＤGET Dpon Getledilluminate ?LEDILLUMINATE Response GLEDILLUMINATE=Setting：ＩＤGET Ledilluminate Response GNOSHOWSTATE=Status：ＩＤ GET NoshowstateGetnoshowstate ?NOSHOWSTATE Response GFREEZE=Status：ＩＤ GET FreezeGetfreeze Response GSIGNALSTATUS=Signal status ：ＩＤ GET SignalstatusGET Signalstatus ? Signalstatus Response GLAMPCOUNTER=Lamp on time Character string GET LampcounterGET Lampcounter ? Lampcounter GET ERR Error information inquiry? ERR Response GERR=Error ＩＤＩＤ Error ID Meaning Response GPRODCODE=Product name Character string GET ProdcodeProduct information inquiry GET Prodcode ? Prodcode GET Romver ? Romver For all other responses, refer to Error ListGET Romver Function ROM version inquiry Format GET Comver ? Comver Function User command version inquiry FormatUser command version = GET Comver Format Range Parameter Range Parameter name=Type, Setting range Range Power Range PowerFunction Power control setting option request Format Rangeblank Range Blank Rangeautosetexe Function Auto setup setting option request FormatRange Autosetexe RINPUT=I, D-RGB, A-RGB1, A-RGB2, COMP, VIDEO, S-VIDEO Input selection setting option requestRange Input Range Input Range Dots Total dot number setting range inquiryRange Dots Range Dots RTRACK=N, 0 Tracking adjustment range requestRange Track Range Track Range Vpos Commands, respectivelyRange HPOS/VPOS Range Hpos Range Vpos RVPIX=N, 0 Horizontal/vertical resolution setting range requestRange HPIX/VPIX Range Hpix RSEL=I, Auto Input signal setting option requestRange SEL Range SEL Range Aspect Screen setting option requestRange Aspect Range Image Image mode setting option requestRange Image Range Image Range BRI Brightness setting range requestRange BRI Contrast setting range request Range Sharp Sharpness setting range requestRange Sharp RGAMMA=N, -4 Gamma adjustment range requestRange Gamma Range Gamma Range Dgamma Dynamic gamma setting option requestRange Dgamma RPROG=I, 0, 1 Progressive setting option requestRange Prog Range Prog Range WB RWB=I, NORMAL, GREENBOARD, AdjustRange WB Screen color correction option request Set Screen color correction adjustment range requestRange Wbrgb Range Wbrgb RSAT=N, -20 Color saturation setting range requestRange SAT Range SAT RHUE=N, -20 Hue setting range requestRange HUE Range HUE Rangergbgain Function RGB gain adjustment range request FormatRange Rgbgain Rangergboffset Function RGB offset adjustment range inquiry FormatRange Rgboffset Advanced color adjustment option request Range AcadjustRange Acadjust RACADJUST=I, NOCORRECT, MEML, MEMM, MEMH, 6AX Rangememcadj Range Memcadj RANGE6AXADJ Function 6-axis adjustment option inquiry FormatRange 6AXADJ R6AXC=N, -20, 20, -20 Range 6AXR-6AXY Range Lamp Lamp output setting option requestRange Lamp RHKS=N, -30 Vertical/horizontal keystone setting range requestRange VKS/HKS Range VKS RAVOL=N, 0 Audio volume setting range requestRange Avol Range Avol RMUTE=I, ON, OFF Mute control setting option requestRange Mute Range Mute Range Bvol Beep sound setting option requestRange Bvol Range Imageflip Flip display setting option requestFlip display can be set using the Imageflip command Range Imageflip Range PMM Power management setting option requestRange PMM To be set Display screen at startup setting option requestRange Pjon Range Pjon RNOSIG=I, BLACK, BLUE, Logo Range NosigBe set RNOSHOW=I, BLACK, BLUE, Logo Display screen when nothing is shown setting option requestRange Noshow RLOGOPOS=I, UPPERL, UPPERR, CENTER, LOWERL, Lowerr User image position setting option inquiryRange Logopos Range Lang Language setting option requestRange Lang Range Terminal Function Terminal setting option request FormatRange Terminal RKEYLOCK=I, MAIN, RC Key lock setting option requestKey lock can be set by the Keylock command Range Keylock Range Rcch Remote control setting option requestRange Rcch Rangeguide Range Guide Rangedpon Range Dpon Rangeledilluminate Range Ledilluminate Rangezstepdrv Range ZstepdrvFunction Zoom lens step drive control option request Format Range Zcontdrv Range ZcontdrvRangecontzdrv Rangefstepdrv Range Fstepdrv Range Fcontdrv Range FcontdrvRangefcontdrv Error List DZ OOMP, D Zoomm TimerOther NOS HOW Appendix 1 Reset Items Appendix 2 Table of Response Patterns by Command 1/3 Appendix 2 Table of Response Patterns by Command 2/3 Appendix 2 Table of Response Patterns by Command 3/3