Canon X600 Format 6AXADJ=6-axis adjustment parameter：ＩＤ Parameter, 6AXADJ=ON, Range 6AXADJ

User Command Specifications ９．Details of command 6AXADJ

Commands	6AXADJ			Mode	Control	Setting	Reference
Function	6-axis adjustment ON/OFF
Format		6AXADJ=<6-axis adjustment parameter：ＩＤ>
Parameter
		Parameter	Meaning
		ON	This sets the 6-axis adjustment to ON.
		OFF	This sets the 6-axis adjustment to OFF.
							ID
	The parameters which can be set at any given point in time can be obtained using the
	RANGE command.
	For details, refer to the RANGE command.
Response	"i:OK" is returned if the parameter was set properly.
	For all other responses, refer to "Error List."
Description	This command is used to select ON or OFF for the 6-axis adjustment.

(1)It can be executed when the projector is in both the remote mode and power-onstatus at the same time.

However, a "busy" response is given while the zoom or focus lens is being driven.

（Refer to the ZCONTDRV command and FCONTDRV command. ）

(2)In the case of "6-axis adjustment," set the hue and color saturation of each axis using the 6AXR to Y "6-axis correction R to Y hue/color saturation setting" commands.

(3)This command functions in the same way as when "Image adjustments" - "6-axis adjustment" are selected on the menu.

(4)This sets the currently selected input signal and image mode.

(5)The current 6-axis adjustment setting can be obtained using the GET command. For details, refer to the GET command.

Example Control

> 6AXADJ=ON

The 6-axis adjustment is set to ON.

< i:OK

Reference

> GET 6AXADJ or ?6AXADJ

The 6-axis adjustment ON or OFF setting is obtained.

< g:6AXADJ=ON

Acquisition of parameters which can be set

> RANGE 6AXADJ

< r:6AXADJ=I,ON,OFF

The 6-axis adjustment can be set as "ON" or "OFF."

*Commands are indicated by ">", and responses are indicated by "<".

Commands

SX50

SX6

SX60

X600

supported

０１．００**

０１．０１**

０１．０１**

０１．０１**

×

○

○

○

When a command is not supported, "e:0002 INVALID_COMMAND" is returned.

Supported Command States

Model

Power supply

Input

Mode

Remarks

OFF

ON

PM

D-RGB

A-RGB1

A-RGB2

Comp

Video

S-Video

D-Video

SCART

None

Remote

Local

SX50

－

－

－

－

－

－

－

－

－

－

－

－

－

－

SX6

×

○

×

○

○

○

○

○

○

○

○

○

○

×

SX60

X600

*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response. *When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.

PAGE 44