User Command Specifications

7. Power Management Mode

e

7. Power Management Mode

Concerning the processing for switching to the power management standby or exit mode in the remote or local mode

Mode

SX50

SX6/SX60/SX600

Remote

The power management standby or exit mode is

The power management standby or exit mode is

 

not established.

established when no signals are supplied for at least 5

 

(No countdown is initiated.)

The countdown is aborted by any command other than

 

 

GET/RANGE.

 

 

Control is switched to the "local mode" in the standby or

 

 

exit mode.

Local

The power management standby or exit mode is

established when no signals are supplied for at least 5

 

minutes.

 

Projecting in

progress

Lamp off

Events for returning from standby modeSignal input

Pressing of a button on main unit or remote control

Lamp on REMOTE command

RC/MAIN command (excluding RC/MAIN*-REP)

Lamp

When the standby

cooling in

mode is established

progress

Power management activated

When the exit mode is established

Processing only for commands

enabled in power management

 

 

standby mode

Power Off

PAGE 11

Page 16
Image 16
Canon X600, SX60 specifications Power Management Mode, Get/Range, Events for returning from standby mode ・Signal input