Canon X600, SX60 specifications Format Power Parameter ：ＩＤ, Example Control, Power on

User Command Specifications 9. Details of command POWER

1

Commands	POWER			Mode	Control	Setting	Reference
Function	This controls the power supply
Format		POWER□<Parameter：ＩＤ>
Parameter
		Parameter	Meaning
		ON	Power ON
		OFF	Power OFF				ID
	The parameters which can be controlled at any given point in time can be obtained
	using the RANGE command.
	For details, refer to the RANGE command.
Response "i:OK" is returned if the parameter was set properly.
	For all other responses, refer to "Error List."
Description This performs ON/OFF control of the power supply.
	-1 This command is identical to pressing the POWER button on the remote control or main unit.
	-2 Provided that the remote mode is established, the command can be executed in any projector
		status.
		However, zoom or focus lens drive stops if the zoom or focus lens is being driven.
		(Refer to the ZCONTDRV command and FCONTDRV command.)
	-3 After sending this command, use GET POWER to obtain the power supply state at regular
		intervals, and check that it is in the controlled state (off or on).
	-4 The table below shows the POWER command responses according to the power supply state.

POWER Command Responses by

Power Supply State

Commands	POWER ON	POWER OFF
Status
Off	○	○
Off -> lighted	○	○
Lamp on	○	○
Lighted -> off	△	○
Lighted -> standby	○	○	○： i:OK
In standby	○ ※	○
Standby -> lighted	○	○	△： i:BUSY

-5 The current power supply status can be referenced using the applicable GET command. For details, refer to the GET command.

Example Control

>POWER ON

<i:OK

Reference

>GET POWER or ?POWER < g:POWER=OFF

Acquisition of parameters which can be set

> RANGE POWER

<r:POWER=I,ON,OFF

*Commands are indicated by ">", and responses are indicated by "<".

Commands	SX50	SX6	SX60	X600
supported	01.00**	01.01**	01.01**	01.01**
	○	○	○	○

Supported Command States

Model

Power

Input

Mode

Remarks

OFF

ON

PM

D-RGB

A-RGB1

A-RGB2

Comp

Video

S-Video

D-Video

SCART

None

Remote

Local

SX50

○

○

○

○

○

○

○

○

○

–

–

○

○

×

SX6

○

○

○

○

○

○

○

○

○

○

○

○

○

×

SX60

X600

* "i:BUSY" may be returned if the power status is being switched.

PAGE 16