HP Brocade 4Gb SAN c-Class BladeSystem OA verifies power

25319a

Figure 5 Installing the Brocade 4Gb SAN Switch into an interconnect bay

4.Press the installation handle into the latch to lock the Brocade 4Gb SAN Switch in place.

OA verifies power

As defined earlier, the HP BladeSystem Onboard Administrator (OA) is the enclosure management processor that manages the devices contained within the enclosure. The OA provides a single point from which to perform basic management tasks on switches or server blades installed in the enclosure.

IMPORTANT:

HP recommends reading the appropriate HP BladeSystem Enclosure User Guide and the HP BladeSystem Onboard Administrator User Guide. Reading these guides in sequence will promote an overall understanding of your specific enclosure model.

Once the switch is installed in the interconnect bay, the OA verifies that the switch type matches the mezzanine cards present on the servers. If there is no mismatch, the OA powers up the switch.

If the switch does not power up, check the enclosure and switch status via the OA web interface. Refer to the HP BladeSystem Onboard Administrator User Guide.

26Setup