Environmental requirements | HP Brocade 4Gb SAN c-Class BladeSystem

Environmental requirements

To ensure proper operation, the switch must not be subjected to environmental conditions beyond those for which it was tested. The ranges speciﬁed in Table 17 list the acceptable environment for both operating and non-operating conditions.

Table 17 Environmental requirements

Condition	Acceptable range during operation	Acceptable range during
		non-operation

Ambient	104°F/40 °C at sea level, derated 1 C	-40°C to 70°C with maximum rate of
temperature	per 1000 ft above sea level	change of 20 C /hr
Humidity	5% to 90% relative humidity,	50% to 80% relative humidity,
	non-condensing	non-condensing

Altitude	0 to 10,000 ft (3 km) above sea level	0 to 40,000 ft (12 km) above sea level

Shock	40 G, 2mS duration	140 G, 2mS,

Vibration	0.5 G, 10–500 Hz	2.0 G, 5–500 Hz

Airﬂow	47 cubic ft/minute	None required

Supported SFPs

Do not use unsupported SFPs; they can affect switch operability. They may not ﬁt correctly and may void your warranty. See Optional hardware kits for a list of supported SFPs.

For a complete list of supported devices, refer to the latest version of the HP StorageWorks SAN design reference guide: http://h18000.www1.hp.com/products/ storageworks/san/documentation.html.

Supported HBAs

For a list of HBAs that have been tested and are known to work with the SAN switches, refer to the latest version of the HP StorageWorks SAN design reference guide: http://h18000.www1.hp.com/products/storageworks/san/documentation.html.

76	SAN Switch technical speciﬁcations

Image 76

HP Brocade 4Gb SAN c-Class BladeSystem manual Environmental requirements, Supported SFPs, Supported HBAs

Contents

AA-RWEBB-TE Page Contents Regulatory compliance and safety Managing the 4Gb SAN SwitchPost SAN Switch technical speciﬁcations How to prevent electrostatic discharge Grounding methodsElectrostatic discharge Glossary Index Figures Tables Page SAN Switch related documentation About this guideIntended audience HP c-Class BladeSystem related documentation Before you contact HP Technical Support HP contact information Document conventions Document conventions and symbolsConvention Element Other HP web sites Subscription serviceTIP Overview 4Gb SAN Switch features Identify the physical components of the 4Gb SAN Switch Component identiﬁcation Internal ports summary Item number Description 4Gb SAN Switch redundancy 4Gb SAN Switch licensing Supported optional features ISL trunking groups Optional hardware kits Accessory Part numberOptional hardware Setup Shipping carton contents Installing multiple switches Installation and safety considerationsIdentiﬁes 4Gb SAN switch components Electrical considerations Environmental considerations Install the 4Gb SAN Switch Scale 2/3 = OA veriﬁes power Verifying power-on LEDs Power-on LEDs Checking LEDs Setting the IP address Using Enclosure Bay IP Addressing Ebipa Using External Dhcp Setting the IP address manually Connect interconnect Conﬁgure the 4Gb SAN Switch Items required for conﬁguration Connecting to the Command Line Interface Setting the date and time Verifying installed licenses Example Modifying the FC domain ID optional Enter a unique domain ID. For example Disabling and enabling a switch Disabling and enabling a port Using Dynamic Ports On Demand Dpod Dpod commands Example for Brocade 4/12 SAN Switch Verifying the conﬁguration Backing up the conﬁguration 40Setup Managing the 4Gb SAN Switch Management features 4Gb SAN Switch management features Management tool Out-of-band support In-band support Maintaining the 4Gb SAN Switch Installing dust covers in empty portsConnecting via a management station Replacing an SFP transceiver Diagnostic tests Installing an SFP SFP components Powering on and off Interpreting LED activity LED indicators Description LED indicators Number System and power LED patterns are shown in Table LED patternsModule status LED patterns Module Status LED patterns during normal operation Port link status LED patterns Port link status LED patterns Boot Post and boot speciﬁcationsPort link speed LED patterns Interpreting Post results Firmware update About the reset button Rebooting the switch Replacing a faulty 4Gb SAN Switch Save the conﬁguration ﬁle Regulatory compliance and safety Regulatory compliance Regulatory compliance identiﬁcation numbers Laser device International notices and statements Canadian notice avis Canadien European Union notice Bsmi notice Japanese notice Korean notices Safety Battery replacement notice Power cords Taiwan battery recycling noticeJapanese power cord statement English notice Waste Electrical and Electronic Equipment directiveDutch notice Czechoslovakian notice Estonian notice Finnish notice French notice German notice Greek notice Hungarian notice Italian notice Latvian notice Lithuanian notice Polish notice Portuguese notice Slovakian notice Slovenian notice Spanish notice Swedish notice How to prevent electrostatic discharge Electrostatic dischargeGrounding methods This appendix provides the following information Electrostatic discharge SAN Switch technical speciﬁcations General speciﬁcations General speciﬁcationsSpeciﬁcation Description Weight and physical dimensions 4Gb SAN Switch physical dimensionsDimension Measurement Lists physical properties Environmental requirements Supported SFPsSupported HBAs Environmental requirements Glossary AlpaAPI Awtov DLS CRCEdtov FCP FciaFlogi FSP FRUFspf Lmtov LIPLpsm LWL MIB Plogi Ratov RAID RrtovRscn SAN SWL WWN 86Glossary Index ISLTrunking groups LED Transceiver, 14, 16, 31, 44, 47