Setting the IP address | HP Brocade 4Gb SAN c-Class BladeSystem

Setting the IP address

IMPORTANT:

The switch supports DHCP beginning with Fabric OS 5.2.1b ﬁrmware. For switches running Fabric OS 5.2.1b (switch rev 0C) or later, DHCP is enabled by default, simplifying multiple switch installations. To enable or disable this feature, login with these default credentials and issue the ipaddrset command using:

•username: admin

•password: password

To set the Ethernet IP address:

1.Verify that the enclosure is powered on.

2.Verify that the switch is installed.

3.Choose one of the following methods to set the Ethernet IP address:

•Using Enclosure Bay IP Addressing (EBIPA)

•Using External DHCP

•Setting the IP address manually

Using Enclosure Bay IP Addressing (EBIPA)

To set the Ethernet IP address using EBIPA:

1.Connect to the active OA via a web browser.

2.Enable EBIPA for the corresponding interconnect bay.

3.Click the Apply button to restart the switch.

4.Verify the IP address using a telnet or ssh login to the switch, or by selecting the switch in the OA GUI Rack Overview window.

28Setup

Image 28

HP Brocade 4Gb SAN c-Class BladeSystem manual Setting the IP address, Using Enclosure Bay IP Addressing Ebipa

Contents

AA-RWEBB-TE Page Contents Regulatory compliance and safety Managing the 4Gb SAN SwitchPost SAN Switch technical speciﬁcations How to prevent electrostatic discharge Grounding methodsElectrostatic discharge Glossary Index Figures Tables Page SAN Switch related documentation About this guideIntended audience HP c-Class BladeSystem related documentation Before you contact HP Technical Support HP contact information Document conventions Document conventions and symbolsConvention Element Other HP web sites Subscription serviceTIP Overview 4Gb SAN Switch features Identify the physical components of the 4Gb SAN Switch Component identiﬁcation Internal ports summary Item number Description 4Gb SAN Switch redundancy 4Gb SAN Switch licensing Supported optional features ISL trunking groups Optional hardware kits Accessory Part numberOptional hardware Setup Shipping carton contents Installing multiple switches Installation and safety considerationsIdentiﬁes 4Gb SAN switch components Electrical considerations Environmental considerations Install the 4Gb SAN Switch Scale 2/3 = OA veriﬁes power Verifying power-on LEDs Power-on LEDs Checking LEDs Setting the IP address Using Enclosure Bay IP Addressing Ebipa Using External Dhcp Setting the IP address manually Connect interconnect Conﬁgure the 4Gb SAN Switch Items required for conﬁguration Connecting to the Command Line Interface Setting the date and time Verifying installed licenses Example Modifying the FC domain ID optional Enter a unique domain ID. For example Disabling and enabling a switch Disabling and enabling a port Using Dynamic Ports On Demand Dpod Dpod commands Example for Brocade 4/12 SAN Switch Verifying the conﬁguration Backing up the conﬁguration 40Setup Managing the 4Gb SAN Switch Management features 4Gb SAN Switch management features Management tool Out-of-band support In-band support Maintaining the 4Gb SAN Switch Installing dust covers in empty portsConnecting via a management station Replacing an SFP transceiver Diagnostic tests Installing an SFP SFP components Powering on and off Interpreting LED activity LED indicators Description LED indicators Number System and power LED patterns are shown in Table LED patternsModule status LED patterns Module Status LED patterns during normal operation Port link status LED patterns Port link status LED patterns Boot Post and boot speciﬁcationsPort link speed LED patterns Interpreting Post results Firmware update About the reset button Rebooting the switch Replacing a faulty 4Gb SAN Switch Save the conﬁguration ﬁle Regulatory compliance and safety Regulatory compliance Regulatory compliance identiﬁcation numbers Laser device International notices and statements Canadian notice avis Canadien European Union notice Bsmi notice Japanese notice Korean notices Safety Battery replacement notice Power cords Taiwan battery recycling noticeJapanese power cord statement English notice Waste Electrical and Electronic Equipment directiveDutch notice Czechoslovakian notice Estonian notice Finnish notice French notice German notice Greek notice Hungarian notice Italian notice Latvian notice Lithuanian notice Polish notice Portuguese notice Slovakian notice Slovenian notice Spanish notice Swedish notice How to prevent electrostatic discharge Electrostatic dischargeGrounding methods This appendix provides the following information Electrostatic discharge SAN Switch technical speciﬁcations General speciﬁcations General speciﬁcationsSpeciﬁcation Description Weight and physical dimensions 4Gb SAN Switch physical dimensionsDimension Measurement Lists physical properties Environmental requirements Supported SFPsSupported HBAs Environmental requirements Glossary AlpaAPI Awtov DLS CRCEdtov FCP FciaFlogi FSP FRUFspf Lmtov LIPLpsm LWL MIB Plogi Ratov RAID RrtovRscn SAN SWL WWN 86Glossary Index ISLTrunking groups LED Transceiver, 14, 16, 31, 44, 47