Output tray settings, Output Printer printer | Ricoh LD435c specs

System Settings

❖ Output: Printer (printer)

Specify a tray to which documents are delivered.

The output trays set on the printer driver have priority over the output tray specified below.

		• Internal Tray 1
		•	Internal Tray 2
		•	Finisher Upper Tray
	2
		•	Finisher Shift Tray

❖System Status/Job List Display Time

Specify how long to display the System Status and Job List display for.

•On: 60 second(s)

•Off

By selecting [On], you can specify a display time between 10 and 999 seconds.

❖Key Repeat

You can enable or disable repetition of an operation if a key on the screen or control panel is pressed continuously.

•Off

•Normal

•Repeat Time: Medium

•Repeat Time: Long

Note

❒If the Panel Tone setting is [Off], the beeper does not sound, whatever the Warm Up Notice setting.

❒The Function Reset Timer setting is ignored if Interleave is set for Print Priority.

Reference

p.3 “Accessing User Tools”

"Function Compatibility", Copy/Document Server Reference

Output tray settings

Important

❒You cannot interrupt the current stapling job even if a stapling job is specified by a different function.

❒When the 1000-sheet finisher, 3000-sheet finisher, or booklet finisher is in- stalled and Staple or Shift Sort is specified for a job, the job will be delivered to the finisher shift tray regardless of the output tray specified.

50

Image 58

Ricoh LD435c Output tray settings, Output Printer printer, System Status/Job List Display Time, Key Repeat

Contents

General Settings Guide Page Manuals for This Machine Other manuals Table of Contents Program / Change / Delete Scan Size 141 Parameter Settings 152Edit 100 Stamp 106 Registering Fax Information 144 Authentication Information 214 Box Settings 172General Settings 199 Scan Settings 201 Send Settings 203 Test Print 185 Registering Folders 240 Registering Smtp and Ldap Authentication 270Mail Destination 236 Registering Names to a Group 257 How to Read This Manual Symbols Display Panel Reference Accessing User ToolsChanging Default Settings Press the User Tools/Counter key Quitting User Tools Menu Protect Connecting to the Interfaces Connecting to the Ethernet Interface Turn on the main power switch of the machine Connecting to the USB Interface Connect the USB2.0 interface cable to the USB2.0 port Connecting to the Ieee 1394 Interface Connect the Ieee 1394 interface cable to the Ieee 1394 port Connecting to the Ieee 1284 Interface Connecting to the Ieee 802.11b Wireless LAN Interface Setup Procedure When using in infrastructure mode Checking the Connection When using in adhoc mode / 802.11 ad hoc mode Checking the Signal Settings Required to Use the Printer/LAN-Fax Network SettingsEthernet Ieee 1394 IPv4 over IPv6 can be used only for the printer function Ieee 802.11b wireless LAN Settings Required to Use Internet Fax Interface Settings File Transfer Network Settings Ieee 802.11b wireless LAN Settings Required to Use E-mail Function Reference Ieee 1394 IPv4 over Ieee 802.11b wireless LAN Settings Required to Use Scan to Folder Function Ieee 1394 IPv4 over Ieee 802.11b wireless LAN Settings Required to Use the Network Delivery Scanner Ieee 1394 IPv4 over Ieee 802.11b wireless LAN Settings Required to Use Network Twain Scanner Ieee 1394 IPv4 over Settings Required to Use Document Server Ieee 1394 IPv4 over Ieee 802.11b wireless LAN Using Utilities to Make Network Settings Network → DNS Configuration → Specify → DNS Server Network → IPv6 Stateless Address AutoconfigurationNetwork → DNS Configuration → Auto-Obtain Dhcp Network → Ddns Configuration Network → Effective Protocol → IPv4 Network → Wins Configuration → On → Secondary Wins ServerNetwork → Wins Configuration → On → Scope ID Network → Effective Protocol → IPv6 Network → NW Frame Type → Ethernet Snap Network → NW Frame Type → Auto SelectNetwork → NW Frame Type → Ethernet Network → SMB Computer Name Network → LAN Type → Ieee 802.11b Ieee 1394 → Ddns ConfigurationNetwork → LAN Type → Ethernet Network → Host Name Ieee 1394 → Wins Configuration → On → Scope ID Ieee 1394 → Wins Configuration → On → Primary Wins ServerIeee 1394 → Wins Configuration → On → Secondary Wins Server Ieee 802.11b → Communication Mode Ieee 802.11b → Channel File Transfer → Smtp AuthenticationFile Transfer → POP3 / IMAP4 Settings Ieee 802.11b → Security Method File Transfer → E-mail Communication Port File Transfer → Administrators E-mail AddressFile Transfer → Default User Name / Password Send File Transfer → E-mail Reception Interval File Transfer → Number of Scanner Resends Connecting the Telephone Line Connecting the Machine to a Telephone Line and TelephoneSelecting the Line Type Connecting the Machine Program / Change / Delete User Text General FeaturesPanel key Sound Copy Count Display copier/Document Server Function Reset TimerWarm-Up Beeper copier/Document Server Function Priority Output Facsimile facsimile Output Copier copierOutput Document Server Document Server Internal Tray System Status/Job List Display Time Output tray settingsOutput Printer printer Key Repeat Paper Tray Priority Facsimile facsimile Tray Paper SettingsPaper Tray Priority Copier copier/Document Server Paper Tray Priority Printer printer Paper sizes you can set for tray 3 are as follows Tray Paper Size TrayPaper sizes you can set for tray 2 are as follows Paper sizes you can set for tray 4 are as follows Paper Type Bypass Tray Printer Bypass Paper SizePaper sizes you can set for bypass tray are as follows No Display Sided Copy Paper Type TrayYes Slip Sheet Tray Cover Sheet TrayOff Reference Energy Saver Timer Timer SettingsAuto Off Timer Panel Off Timer Scanner Auto Reset Timer scanner Facsimile Auto Reset Timer facsimilePrinter Auto Reset Timer printer Auto Logout Timer Machine IPv4 Address Interface SettingsNetwork IPv4 Gateway Address Wins Configuration IPv6 Stateless Address AutoconfigurationDdns Configuration IPv6 Gateway Address NW Frame Type Effective ProtocolNCP Delivery Protocol SMB Computer Name LAN Type Ping CommandEthernet Speed Permit SNMPv3 Communication Parallel Interface IPv4 Address Signal ControlJob Acceptance Priority Scsi print SBP-2 IPv4 overBidirectional Scsi print Ieee 802.11b Print List Restore Factory DefaultsPress System Settings Press Interface Settings Transmission Speed Press the Start key Press Print ListPress Exit Delivery Option File TransferCapture Server IP Address Do not Deliver Fax RX File TransmissionSmtp Server Do not Print Smtp Authentication POP before Smtp Reception Protocol POP3 / IMAP4 SettingsAdministrators E-mail Address POP3 Mail Reception Interval Default User Name / Password SendMail Communication Port Max. Reception E-mail Size Program / Change / Delete E-mail Message Press System Settings Press File TransferPress Program / Change / Delete E-mail Message Press Delete Scanner Resend Interval Time Auto Specify Sender NameFax E-mail Account Number of Scanner Resends Administrator Tools Address Book Management Address Book Program / Change / Delete Group Address Book Change Order System Settings Print Address Book Destination List Address Book Edit Title Display / Print Counter Address Book Switch TitleBack Up / Restore Address Book Display / Clear / Print Counter per User Administrator Authentication Management User Authentication ManagementEnhanced Authentication Management Program / Change Administrator Program / Change/Delete Ldap Server Auto Delete File in Document ServerDelete All Files in Document Server On 3 days Ldap Search Auto Erase Memory SettingTransfer Log Setting AOF Always On To delete the programmed Ldap server Program / Change / Delete Ldap ServerTo program / change the Ldap server Press the User Tools/Counter key Reference To enter a server name Programming the Ldap serverTo enter an identification name To enter the search base To enter a port number To set authenticationTo start SSL communication Press TNext Press Change under User Name To enter the user name and passwordTo test the connection Enter the user name, and then press OK Press TNext twice To set search conditionsTo set search options Ment Name Enter the key display, and then press OK System Settings Original Type Priority Auto Image Density PriorityText / Photo Original Type Display Original Orientation in Duplex ModeOriginal Photo Type Priority Paper Display Max. Copy Quantity Copy Orientation in Duplex ModeAuto Tray Switching Tone Original Remains Customize Function Copier Customize Function Document Server Storage Shortcut R/E Reproduction RatioF1 71% F2 141% F3 93% Ratio F1 73% F2 155% F3 93% A3 → A4, A4 → A5 71% Ratio Priority11⋅15 → 81/2⋅11 73% Ratio for Create Margin Back Margin Left / Right EditFront Margin Left / Right Front Margin Top / Bottom Sided → 2 Sided Auto Margin TtoB Back Margin Top/BottomSided → 2 Sided Auto Margin TtoT Erase Border Width Orientation Booklet, Magazine Front Cover Copy in CombineCopy Order in Combine Copy on Designating Page in Combine None Image Repeat Separation Line103 Black Double Copies Separation Line 104 Separation Line in Combine 105 Size StampBackground Numbering Density Stamp Priority Preset StampStamp Language 107 108 Stamp FormatTop Right 109 All Pages Stamp Format1-4 User StampProgram/Delete Stamp 110 Format Date StampStamp Color1-4 Font 112 Stamp SettingSuperimpose Top Left 113 NumberingDuplex Back Page Stamping Position P1,P2… Stamp Position Numbering in CombineStamp Position on Designating 114 115 Numbering Initial LetterP1, P2.../P.1, P.2 Input/Output Sadf Auto ResetLetterhead Setting Rotate Sort Auto Paper Continue Simplified Screen Finishing Types Staple PositionPunch Type 117 118 Color Sensitivity Adjust Color ImageBackground Density of ADS Full Color S. Sensitivity System Settings Settings for the Document ServerCopier / Document Server Features 120 Quick Operation Key 121 Box Setting Switch TitleAdjust Sound Volume Box Setting Print List On Hook Mode Release Time 123 Program / Change / Delete Scan Size Scan Settings124 Max. E-mail Size Send Settings125 Program / Change / Delete Standard Message 126 Backup File TX Setting 127 Reception Settings Smtp RX File Delivery Settings Stored Reception File User Setting129 Center Mark Sided PrintCheckered Mark 130 Paper Tray Print Reception TimeReception File Print Quantity Specify Tray for Lines Press Folder Transfer Result Report Press Facsimile Features Press Reception Settings132 Press Notify Destination 133 Memory Lock ReceptionPress Memory Lock Reception Parameter Setting Print List Initial SettingsParameter Setting Program Closed Network Code Select Dial / Push Phone Internet Fax SettingsProgram Memory Lock ID 135 Settings Enable H.323Enable SIP Program Fax Information Program / Change / Delete Gateway SIP Settings137 138 139 Reception File SettingPress Print or Store, and then press OK Reception Report e-mail 140 Program / Change / Delete Scan Size Press Facsimile Features141 142 Enter a horizontal size using the number keysSelect a vertical size, and then press OK Deleting a scan size 143 Own Name Registering Fax InformationFax Header Own Fax Number 145 Registering Fax InformationRegistering a Fax Header Check that Fax Header is selected 146 Registering an Own NameRegistering an Own Fax Number Press Own Name 147 Changing Fax InformationDeleting Fax Information Press Backspace or Delete All, and then press OK Forwarding 148 149 Programming an End ReceiverPress On 150 151 Quitting the forwarding functionForwarding Mark Press Off, and then press OK User Parameter List Parameter SettingsSwitches and Bits 152 153 154 Startkey 155 Tiff 156 157 Changing the User Parameters 158 Special Senders to Treat Differently 159 Authorized Reception 160 Print 2 Sided Reception File Print QuantityForwarding 161 Paper Tray Memory Lock162 163 Programming/Changing Special SendersPress Full Agreement or Partial Agreement 164 Select the item you want to program 165 Authorized RX Authorized ReceptionReception File Print Qty Press Authorized Reception per Sender Press Forwarding per Sender 166Select On or Off Press 2 Sided Print per Sender Paper Tray per Sender167 Press Memory Lock Reception per Sender 168 Programming Initial Set Up of a Special SenderSelect the function you want to program 169 Select the size you want to program 170 Press OK Press Exit Deleting a Special Sender 171 SUB Code and SEP Code Box SettingsProgramming/Changing Personal Boxes Check that Program / Change is selected 173 Specify the settings you requirePress Password Select a box to program 174 Enter a password, and then press OKRe-enter the password, and then press OK Press Receiver 175 Deleting Personal BoxesPress Delete, and then select the box you want to delete Programming/Changing Information Boxes 176 Press Information Box 177Select the box to program Enter a box name, and then press OK Enter the SEP Code 178 Deleting Information Boxes 179 Programming/Changing Transfer Boxes 180 Enter a Box name, and then press OK Enter a SUB Code 181Press Transfer Box To Program End Receivers, Select an Receiving Station To program a password, press Password 182 Deleting Transfer Boxes 183 Printing the Box List 184 Test Print Interpreting the configuration System Reference Printing the configuration186 PCL Menu Paper InputSystem PS Menu List / Test Print Lock MaintenanceColor Graphic Mode Delete All Temporary Print Jobs System Duplex Initial Print Job ListMemory Usage Copies Sub Paper Size Bypass Tray Setting PriorityPrinter Language Edge to Edge Print Tray Switching Default Printer Language192 Buffer TimeoutHost Interface 193 PCL Menu Courier Font Symbol SetResolution Extend A4 Width Data Format Color SettingPS Menu Color Profile 197 198 Twain Standby Time General SettingsUpdate Delivery Server Destination List Destination List Display Priority Delete Scanner Journal Print & Delete Scanner JournalPrint Scanner Journal 200 201 S. Sensitivity LevelWait Time for Next Orig. Exposure Glass Set Wait Time 60 sec Wait Time for Next Originals Sadf 202 203 Compression Black & WhiteCompression Gray Scale / Full Color Standard No. of Digits for Single Page Files Divide & Send E-mailMail Information Language Stored File E-mail Method Auth. Info Address BookNames 205 Mail ProtectionFax Dest 206 Add to Group Folder207 Sending e-mail by Quick Dial Managing names in the Address BookSending fax by Quick Dial 208 Sending scanned files to a shared folder directly 209 210 Registering NamesRegistering Names Enter the name, and then press OK 211 Press OK twice Changing a Registered Name 212 Select the name you want to delete Deleting a Registered Name213 Press Yes Press Exit Authentication Information 214 215 Registering a User CodePress Auth. Info Changing a User Code 216 217 Select the user whose user code you want to change 218 Deleting a User CodeSelect the name whose code is to be deleted Printing the Counter for Each User Displaying the Counter for Each User219 Select a user code from the left side of the display 220Press Print Counter List under Per User 221 Printing the Counter for All UsersPress Print Counter List under All Users Clearing the Number of Prints 222 Fax Destination Select Protocol Label insertionIP-Fax 224 225 Fax DestinationRegistering a Fax Destination Press Fax Dest Changing a Fax Destination Change the settings226 To change the line Using a Fax Destination as a senderTo change the fax number 227 To change the SEP Code To set the International TX ModeTo change the SUB Code To select the fax header To set label insertion Press System Settings Press Administrator ToolsDeleting a Fax Destination Select the name whose fax destination you want to delete 230Press Address Book Management Press Delete Press Change under Facsimile No Registering an IP-Fax Destination IP-Fax Destination231 232 Changing a Registered IP-Fax DestinationEnter the IP-Fax destination Press OK twice To select the protocol Using the IP-Fax Destination as the senderTo change the IP-Fax Destination 233 To program the SEP Code To program the SUB Code234 Deleting a Registered IP-Fax Destination 235 236 Mail DestinationPress E-mail 237 Enter the e-mail address Press OK Changing an E-mail Destination 239 Using the e-mail address as the senderDeleting an E-mail Destination Select the name whose e-mail address you want to delete Registering an SMB Folder Using SMB to ConnectRegistering Folders 240 241 Press Folder To locate the SMB folder manually 242 243 To locate the SMB folder using Browse NetworkIf a Login Screen Appears Press Browse Network 244 Changing an SMB FolderSelect the items you want to change 245 To change the protocolDeleting an SMB registered folder Press FTP or NCP Press the protocol which is not currently selected Using FTP to ConnectRegistering an FTP Folder Press Yes Press OK Press Exit 247 Changing an FTP Folder 248 249 Press SMB, or NCP Confirmation message appears. Press Yes 250 Changing items under FTPDeleting an FTP Folder Press Yes Press OK Registering an NCP Folder Using NCP to Connect251 Press NCP Select Connection Type 252Specify the folder Press OK Press Exit To locate the NCP folder manually To locate the NCP folder using Browse Network253 254 Changing an NCP registered folderSpecify the folder Press SMB, or FTP Confirmation message appears. Press Yes Deleting an NCP Folder255 Select a user of the folder you want to delete 256 Exit Registering a Group Registering Names to a Group257 Press the title key under Select Title, if necessary Registering Names to a Group258 AB, CD, EF, GH, IJK, LMN, OPQ, RST, UVW, XYZ, 1 to 10… Press Add to Group Press Administrator Tools Press Address Book Management259 Select a group to which you want to add the name to Adding a Group to Another Group 260 261 Displaying Names Registered in a GroupSelect the group which you want to add to 262 Removing a Name from a GroupPress Programmed User/Group 263 Deleting a Group Within Another GroupSelect the group from which you want to remove the name 264 Select the group that you want to delete from 265 Changing a Group NamePress the group key you want to change 266 Deleting a GroupPress Yes Press a group key you want to delete Registering a Protection Code to a Single User Registering a Protection Code267 268 Press Destination or Sender under Use Name as 269 Registering a Protection Code to a Group UserPress Folder Destination under Protection Object Smtp Authentication Registering Smtp and Ldap Authentication270 271 Ldap Authentication 272 273 274 Color Registration Auto Color Calibration275 Press Español Changing the Display Language276 Press Salir Consumables Machine Maintenance/RepairInquiry Sales Representative 278 Press Exit twice 279 CounterDisplaying the Total Counter Press Counter 280 Specifications for the Main Unit Non-reproduction area Paper weightCopy paper size First copy time Paper capacity Reproduction ratioMaximum continuous copy run 283 Space for main unit W ⋅ D Power consumptionDimensions W ⋅ D ⋅ H up to exposure glass Noise emission HDD Weight285 Auto Document Feeder Specifications for OptionsExposure Glass Cover Sheet Finisher 287 288 Booklet Finisher 289 290 Large Capacity Tray Punch Kit 3000-sheet Finisher / Booklet FinisherTray Paper Unit Bridge Unit Expat Information about Installed SoftwareNetBSD 293 Sablotron 294 Jpeg Library 295 MD4 SambaVer 297 Open SSL 298 299 300 301 302 Open SSH 303 304 305 306 307 Open Ldap 308 309 Index 310 311 312 313 314 315 Means Power ON. c means Stand by Operating Instructions General Settings Guide