Ricoh LD435c Box Settings, Programming/Changing Personal Boxes, SUB Code and SEP Code

Facsimile Features

Box Settings

The following functions are for delivery and transfer of documents:

•Personal Box

•Information Box

•Transfer Box

❖SUB Code and SEP Code

SUB Code and SEP Code are IDs consisting of up to 20 digits, and can include numbers, #, *, and spaces.

To use this function, you must program a box and SUB/SEP Code before-

4	hand. The other party can send documents to, and retrieve stored documents
	from, this box using the code.
	Note

❒The combined total of items that can be stored using the Personal Box, Infor- mation Box, and Transfer Box functions is 150.

❒You cannot set the same Box code on two different boxes.

❒Transmission or programming may not be allowed if there is not enough free memory left. The amount of free memory left differs depending on the op- tional equipment installed.

Programming/Changing Personal Boxes

This section describes how to program Personal Boxes.

You can program the following items:

•Box name (required) Up to 20 characters long

•SUB Code (required)

Up to 20 characters long and can be composed of digits 0-9, "#", "*", and spaces (the first character cannot be a space).

•Password (optional)

Up to 20 characters long and can be composed of digits 0-9, "#", "*", and spaces (the first character cannot be a space).

When programming a password, a mark is displayed before the Box name.

•Receiver (optional)

You can program one delivery destination for each Personal Box. Specify a delivery destination programmed in Destination key.

A Press [Facsimile Features].

B Press [General Features].

C Press [Box Setting].

172D Check that [Program / Change] is selected.