Ricoh LD435c 181, Press Transfer Box, Enter a Box name, and then press OK Enter a SUB Code

Box Settings

E

Select the box to program.

When programming a new box, press [Not Programmed].

To change a box already programmed, press it, and then proceed to stepH.

F

Press [Transfer Box].

4

G H

Enter a Box name, and then press [OK].

Enter a SUB Code.

To change the SUB Code, press [Clear] again. To change Box name, press [Box

or the {Clear/Stop} key, and then try Name], and then repeat from stepG.

I To Program End Receivers, Select an Receiving Station.

You can store five Receiving Station.

181