Ricoh LD435c operating instructions Network Settings

		Network Settings
Menu	User Tool	Setting Requirements
Interface Settings/Network	IPv4 Gateway Address	Necessary
Interface Settings/Network	DNS Configuration	As required
Interface Settings/Network	Effective Protocol	Necessary	1
File Transfer	SMTP Server	Necessary
File Transfer	SMTP Authentication	As required
File Transfer	POP before SMTP	As required
File Transfer	Reception Protocol	As required
File Transfer	POP3 / IMAP4 Settings	As required
File Transfer	Administrator's E-mail Address	As required
File Transfer	E-mail Communication Port	Necessary
File Transfer	E-mail Reception Interval	As required
File Transfer	Max. Reception E-mail Size	As required
File Transfer	E-mail Storage in Server	As required
File Transfer	Program / Change /	As required
	Delete E-mail Message
File Transfer	Fax E-mail Account	Necessary

Note

❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed.

❒For the Effective Protocol setting, check that the protocol you want to use is set to [Active].

❒SMTP Server and Fax E-mail Account must be specified in order to use the send function.

❒When POP before SMTP is set to [On], also make setting for Reception Proto- col and POP3 / IMAP4 Settings.

❒When SMTP Authentication is set to [On], also make setting for Administra- tor's E-mail Address.

❒E-mail Communication Port and Fax E-mail Account must be specified in or- der to use the reception function.

❒When setting POP before SMTP to [On], check POP3 port number in E-mail Communication Port.

Reference

p.59 “Interface Settings”

p.69 “File Transfer”

19