Ricoh LD435c operating instructions Ieee 1394 IPv4 over

Network Settings

IEEE 1394 (IPv4 over 1394)

This section lists the settings required for sending e-mail with an IEEE 1394 con- nection.

For details about how to specify the settings, see "Interface Settings" and "File			1
Transfer".
Menu	User Tool	Setting Requirements
Interface Settings/IEEE 1394	IPv4 Address	Necessary
Interface Settings/IEEE 1394	DDNS Configuration	As required
Interface Settings/IEEE 1394	Host Name	As required
Interface Settings/IEEE 1394	Domain Name	As required
Interface Settings/IEEE 1394	WINS Configuration	As required
Interface Settings/IEEE 1394	IPv4 over 1394	Necessary
Interface Settings/Network	IPv4 Gateway Address	Necessary
Interface Settings/Network	DNS Configuration	As required
Interface Settings/Network	Effective Protocol	Necessary
File Transfer	SMTP Server	Necessary
File Transfer	SMTP Authentication	As required
File Transfer	POP before SMTP	As required
File Transfer	Reception Protocol	As required
File Transfer	POP3 / IMAP4 Settings	As required
File Transfer	Administrator's E-mail Address	As required
File Transfer	E-mail Communication Port	As required
File Transfer	Program / Change /	As required
	Delete E-mail Message
File Transfer	Scanner Resend Interval Time	As required
File Transfer	Number of Scanner Resends	As required

Note

❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed.

❒For the Effective Protocol setting, check that the protocol you want to use is set to [Active].

❒When POP before SMTP is set to [On], also make setting for Reception Proto- col and POP3 / IMAP4 Settings.

❒When setting POP before SMTP to [On], check POP3 port number in E-mail Communication Port.

Reference

p.59 “Interface Settings”

p.69 “File Transfer”

23