Ieee 802.11b | Ricoh LD435c guide

System Settings

IEEE 802.11b

This section describes the user tools in the IEEE 802.11b menu under Interface Settings.

[IEEE 802.11b] is displayed when this machine is installed with the wireless LAN interface board.

2	Be sure to make all settings simultaneously.

❖Communication Mode

Specifies the communication mode of the wireless LAN.

•802.11 Ad-hoc Mode

•Ad-hoc Mode

•Infrastructure Mode

❖SSID Setting

Specifies SSID to distinguish the access point in infrastructure mode or 802.11 ad hoc mode.

The characters that can be used are ASCII 0x20-0x7e (32 bytes).

If blank is specified in 802.11b ad hoc mode or ad hoc mode, "ASSID" appears.

❖Channel

Specifies a channel when you select 802.11b ad hoc mode or ad hoc mode. The default setting is 11.

The following channels are available:

•Metric version: 1-14

•Inch version: 1-11

❖Security Method

Specifies the encryption of the IEEE 802.11b (wireless LAN).

If you select [WEP], always enter WEP key. If you select [WPA], the encryption and authentication methods.

Specify "WPA", when [Communication Mode] is set to [Infrastructure Mode].

•Off

•WEP

•WPA

•WPA Encryption Method

Select either "TKIP" or "CCMP(AES)".

•WPA Authent. Method

Select either "WPA-PSK" or "WPA802.1X)". If you have selected "WPA- PSK", enter the pre-shared key (PSK) of 8- 63 characters in ASCII code.

❖Wireless LAN Signal

When using in infrastructure mode, you can check the machine's radio wave status using the control panel.

Radio wave status is displayed when you press [Wireless LAN Signal].

66

Image 74

Ricoh LD435c operating instructions Ieee 802.11b

Contents

General Settings Guide Page Manuals for This Machine Other manuals Table of Contents Program / Change / Delete Scan Size 141 Parameter Settings 152Edit 100 Stamp 106 Registering Fax Information 144 Authentication Information 214 Box Settings 172General Settings 199 Scan Settings 201 Send Settings 203 Test Print 185 Registering Folders 240 Registering Smtp and Ldap Authentication 270Mail Destination 236 Registering Names to a Group 257 How to Read This Manual Symbols Display Panel Reference Accessing User ToolsChanging Default Settings Press the User Tools/Counter key Quitting User Tools Menu Protect Connecting to the Interfaces Connecting to the Ethernet Interface Turn on the main power switch of the machine Connecting to the USB Interface Connect the USB2.0 interface cable to the USB2.0 port Connecting to the Ieee 1394 Interface Connect the Ieee 1394 interface cable to the Ieee 1394 port Connecting to the Ieee 1284 Interface Connecting to the Ieee 802.11b Wireless LAN Interface Setup Procedure When using in infrastructure mode Checking the Connection When using in adhoc mode / 802.11 ad hoc mode Checking the Signal Ethernet Network SettingsSettings Required to Use the Printer/LAN-Fax Ieee 1394 IPv4 over IPv6 can be used only for the printer function Ieee 802.11b wireless LAN Settings Required to Use Internet Fax Interface Settings File Transfer Network Settings Ieee 802.11b wireless LAN Settings Required to Use E-mail Function Reference Ieee 1394 IPv4 over Ieee 802.11b wireless LAN Settings Required to Use Scan to Folder Function Ieee 1394 IPv4 over Ieee 802.11b wireless LAN Settings Required to Use the Network Delivery Scanner Ieee 1394 IPv4 over Ieee 802.11b wireless LAN Settings Required to Use Network Twain Scanner Ieee 1394 IPv4 over Settings Required to Use Document Server Ieee 1394 IPv4 over Ieee 802.11b wireless LAN Using Utilities to Make Network Settings Network → DNS Configuration → Specify → DNS Server Network → IPv6 Stateless Address AutoconfigurationNetwork → DNS Configuration → Auto-Obtain Dhcp Network → Ddns Configuration Network → Effective Protocol → IPv4 Network → Wins Configuration → On → Secondary Wins ServerNetwork → Wins Configuration → On → Scope ID Network → Effective Protocol → IPv6 Network → NW Frame Type → Ethernet Snap Network → NW Frame Type → Auto SelectNetwork → NW Frame Type → Ethernet Network → SMB Computer Name Network → LAN Type → Ieee 802.11b Ieee 1394 → Ddns ConfigurationNetwork → LAN Type → Ethernet Network → Host Name Ieee 1394 → Wins Configuration → On → Scope ID Ieee 1394 → Wins Configuration → On → Primary Wins ServerIeee 1394 → Wins Configuration → On → Secondary Wins Server Ieee 802.11b → Communication Mode Ieee 802.11b → Channel File Transfer → Smtp AuthenticationFile Transfer → POP3 / IMAP4 Settings Ieee 802.11b → Security Method File Transfer → E-mail Communication Port File Transfer → Administrators E-mail AddressFile Transfer → Default User Name / Password Send File Transfer → E-mail Reception Interval File Transfer → Number of Scanner Resends Selecting the Line Type Connecting the Machine to a Telephone Line and TelephoneConnecting the Telephone Line Connecting the Machine Panel key Sound General FeaturesProgram / Change / Delete User Text Copy Count Display copier/Document Server Function Reset TimerWarm-Up Beeper copier/Document Server Function Priority Output Facsimile facsimile Output Copier copierOutput Document Server Document Server Internal Tray System Status/Job List Display Time Output tray settingsOutput Printer printer Key Repeat Paper Tray Priority Facsimile facsimile Tray Paper SettingsPaper Tray Priority Copier copier/Document Server Paper Tray Priority Printer printer Paper sizes you can set for tray 3 are as follows Tray Paper Size TrayPaper sizes you can set for tray 2 are as follows Paper sizes you can set for tray 4 are as follows Paper Type Bypass Tray Printer Bypass Paper SizePaper sizes you can set for bypass tray are as follows No Display Yes Paper Type TraySided Copy Off Cover Sheet TraySlip Sheet Tray Reference Energy Saver Timer Timer SettingsAuto Off Timer Panel Off Timer Scanner Auto Reset Timer scanner Facsimile Auto Reset Timer facsimilePrinter Auto Reset Timer printer Auto Logout Timer Machine IPv4 Address Interface SettingsNetwork IPv4 Gateway Address Wins Configuration IPv6 Stateless Address AutoconfigurationDdns Configuration IPv6 Gateway Address NW Frame Type Effective ProtocolNCP Delivery Protocol SMB Computer Name LAN Type Ping CommandEthernet Speed Permit SNMPv3 Communication Parallel Interface Job Acceptance Priority Signal ControlIPv4 Address Bidirectional Scsi print IPv4 overScsi print SBP-2 Ieee 802.11b Print List Restore Factory DefaultsPress System Settings Press Interface Settings Transmission Speed Press Exit Press Print ListPress the Start key Capture Server IP Address File TransferDelivery Option Do not Deliver Fax RX File TransmissionSmtp Server Do not Print Smtp Authentication POP before Smtp Reception Protocol POP3 / IMAP4 SettingsAdministrators E-mail Address POP3 Mail Reception Interval Default User Name / Password SendMail Communication Port Max. Reception E-mail Size Press Program / Change / Delete E-mail Message Press Delete Press System Settings Press File TransferProgram / Change / Delete E-mail Message Scanner Resend Interval Time Auto Specify Sender NameFax E-mail Account Number of Scanner Resends Administrator Tools Address Book Management Address Book Program / Change / Delete Group Address Book Change Order System Settings Print Address Book Destination List Address Book Edit Title Display / Print Counter Address Book Switch TitleBack Up / Restore Address Book Display / Clear / Print Counter per User Administrator Authentication Management User Authentication ManagementEnhanced Authentication Management Program / Change Administrator Program / Change/Delete Ldap Server Auto Delete File in Document ServerDelete All Files in Document Server On 3 days Ldap Search Auto Erase Memory SettingTransfer Log Setting AOF Always On To delete the programmed Ldap server Program / Change / Delete Ldap ServerTo program / change the Ldap server Press the User Tools/Counter key Reference To enter a server name Programming the Ldap serverTo enter an identification name To enter the search base To start SSL communication To set authenticationTo enter a port number Press TNext Press Change under User Name To enter the user name and passwordTo test the connection Enter the user name, and then press OK Press TNext twice To set search conditionsTo set search options Ment Name Enter the key display, and then press OK System Settings Text / Photo Auto Image Density PriorityOriginal Type Priority Original Type Display Original Orientation in Duplex ModeOriginal Photo Type Priority Paper Display Max. Copy Quantity Copy Orientation in Duplex ModeAuto Tray Switching Tone Original Remains Customize Function Copier Customize Function Document Server Storage F1 71% F2 141% F3 93% Reproduction RatioShortcut R/E Ratio F1 73% F2 155% F3 93% 11⋅15 → 81/2⋅11 73% Ratio PriorityA3 → A4, A4 → A5 71% Ratio for Create Margin Back Margin Left / Right EditFront Margin Left / Right Front Margin Top / Bottom Sided → 2 Sided Auto Margin TtoB Back Margin Top/BottomSided → 2 Sided Auto Margin TtoT Erase Border Width Orientation Booklet, Magazine Front Cover Copy in CombineCopy Order in Combine Copy on Designating Page in Combine None Image Repeat Separation Line103 Black Double Copies Separation Line 104 Separation Line in Combine 105 Size StampBackground Numbering Density Stamp Priority Preset StampStamp Language 107 Top Right Stamp Format108 109 All Pages Stamp Format1-4 User StampProgram/Delete Stamp 110 Format Date StampStamp Color1-4 Font 112 Stamp SettingSuperimpose Top Left 113 NumberingDuplex Back Page Stamping Position P1,P2… Stamp Position Numbering in CombineStamp Position on Designating 114 P1, P2.../P.1, P.2 Numbering Initial Letter115 Input/Output Sadf Auto ResetLetterhead Setting Rotate Sort Auto Paper Continue Simplified Screen Finishing Types Staple PositionPunch Type 117 118 Color Sensitivity Adjust Color ImageBackground Density of ADS Full Color S. Sensitivity System Settings Settings for the Document ServerCopier / Document Server Features 120 Quick Operation Key 121 Box Setting Switch TitleAdjust Sound Volume Box Setting Print List On Hook Mode Release Time 123 124 Scan SettingsProgram / Change / Delete Scan Size 125 Send SettingsMax. E-mail Size Program / Change / Delete Standard Message 126 Backup File TX Setting 127 Reception Settings 129 Stored Reception File User SettingSmtp RX File Delivery Settings Center Mark Sided PrintCheckered Mark 130 Paper Tray Print Reception TimeReception File Print Quantity Specify Tray for Lines Press Folder Transfer Result Report Press Facsimile Features Press Reception Settings132 Press Notify Destination Press Memory Lock Reception Memory Lock Reception133 Parameter Setting Print List Initial SettingsParameter Setting Program Closed Network Code Select Dial / Push Phone Internet Fax SettingsProgram Memory Lock ID 135 Settings Enable H.323Enable SIP Program Fax Information 137 SIP SettingsProgram / Change / Delete Gateway 138 Press Print or Store, and then press OK Reception File Setting139 Reception Report e-mail 140 141 Press Facsimile FeaturesProgram / Change / Delete Scan Size Select a vertical size, and then press OK Enter a horizontal size using the number keys142 Deleting a scan size 143 Own Name Registering Fax InformationFax Header Own Fax Number 145 Registering Fax InformationRegistering a Fax Header Check that Fax Header is selected 146 Registering an Own NameRegistering an Own Fax Number Press Own Name 147 Changing Fax InformationDeleting Fax Information Press Backspace or Delete All, and then press OK Forwarding 148 Press On Programming an End Receiver149 150 151 Quitting the forwarding functionForwarding Mark Press Off, and then press OK User Parameter List Parameter SettingsSwitches and Bits 152 153 154 Startkey 155 Tiff 156 157 Changing the User Parameters 158 Special Senders to Treat Differently 159 Authorized Reception 160 Print 2 Sided Reception File Print QuantityForwarding 161 162 Memory LockPaper Tray Press Full Agreement or Partial Agreement Programming/Changing Special Senders163 164 Select the item you want to program 165 Authorized RX Authorized ReceptionReception File Print Qty Press Authorized Reception per Sender Select On or Off 166Press Forwarding per Sender Press 2 Sided Print per Sender Paper Tray per Sender167 Press Memory Lock Reception per Sender Select the function you want to program Programming Initial Set Up of a Special Sender168 169 Select the size you want to program 170 Press OK Press Exit Deleting a Special Sender 171 SUB Code and SEP Code Box SettingsProgramming/Changing Personal Boxes Check that Program / Change is selected 173 Specify the settings you requirePress Password Select a box to program 174 Enter a password, and then press OKRe-enter the password, and then press OK Press Receiver Press Delete, and then select the box you want to delete Deleting Personal Boxes175 Programming/Changing Information Boxes 176 Press Information Box 177Select the box to program Enter a box name, and then press OK Enter the SEP Code 178 Deleting Information Boxes 179 Programming/Changing Transfer Boxes 180 Enter a Box name, and then press OK Enter a SUB Code 181Press Transfer Box To Program End Receivers, Select an Receiving Station To program a password, press Password 182 Deleting Transfer Boxes 183 Printing the Box List 184 Test Print 186 Printing the configurationInterpreting the configuration System Reference PCL Menu Paper InputSystem PS Menu List / Test Print Lock MaintenanceColor Graphic Mode Delete All Temporary Print Jobs System Duplex Initial Print Job ListMemory Usage Copies Sub Paper Size Bypass Tray Setting PriorityPrinter Language Edge to Edge Print 192 Default Printer LanguageTray Switching Buffer TimeoutHost Interface 193 PCL Menu Courier Font Symbol SetResolution Extend A4 Width Data Format Color SettingPS Menu Color Profile 197 198 Twain Standby Time General SettingsUpdate Delivery Server Destination List Destination List Display Priority Delete Scanner Journal Print & Delete Scanner JournalPrint Scanner Journal 200 201 S. Sensitivity LevelWait Time for Next Orig. Exposure Glass Set Wait Time 60 sec Wait Time for Next Originals Sadf 202 203 Compression Black & WhiteCompression Gray Scale / Full Color Standard No. of Digits for Single Page Files Divide & Send E-mailMail Information Language Stored File E-mail Method Auth. Info Address BookNames 205 Mail ProtectionFax Dest 206 207 FolderAdd to Group Sending e-mail by Quick Dial Managing names in the Address BookSending fax by Quick Dial 208 Sending scanned files to a shared folder directly 209 210 Registering NamesRegistering Names Enter the name, and then press OK 211 Press OK twice Changing a Registered Name 212 Select the name you want to delete Deleting a Registered Name213 Press Yes Press Exit Authentication Information 214 Press Auth. Info Registering a User Code215 Changing a User Code 216 217 Select the user whose user code you want to change Select the name whose code is to be deleted Deleting a User Code218 219 Displaying the Counter for Each UserPrinting the Counter for Each User Press Print Counter List under Per User 220Select a user code from the left side of the display Press Print Counter List under All Users Printing the Counter for All Users221 Clearing the Number of Prints 222 Fax Destination Select Protocol Label insertionIP-Fax 224 225 Fax DestinationRegistering a Fax Destination Press Fax Dest 226 Change the settingsChanging a Fax Destination To change the line Using a Fax Destination as a senderTo change the fax number 227 To change the SEP Code To set the International TX ModeTo change the SUB Code To select the fax header Deleting a Fax Destination Press System Settings Press Administrator ToolsTo set label insertion Select the name whose fax destination you want to delete 230Press Address Book Management Press Delete Press Change under Facsimile No 231 IP-Fax DestinationRegistering an IP-Fax Destination Enter the IP-Fax destination Press OK twice Changing a Registered IP-Fax Destination232 To select the protocol Using the IP-Fax Destination as the senderTo change the IP-Fax Destination 233 234 To program the SUB CodeTo program the SEP Code Deleting a Registered IP-Fax Destination 235 Press E-mail Mail Destination236 237 Enter the e-mail address Press OK Changing an E-mail Destination 239 Using the e-mail address as the senderDeleting an E-mail Destination Select the name whose e-mail address you want to delete Registering an SMB Folder Using SMB to ConnectRegistering Folders 240 241 Press Folder To locate the SMB folder manually 242 243 To locate the SMB folder using Browse NetworkIf a Login Screen Appears Press Browse Network Select the items you want to change Changing an SMB Folder244 245 To change the protocolDeleting an SMB registered folder Press FTP or NCP Press the protocol which is not currently selected Using FTP to ConnectRegistering an FTP Folder Press Yes Press OK Press Exit 247 Changing an FTP Folder 248 249 Press SMB, or NCP Confirmation message appears. Press Yes 250 Changing items under FTPDeleting an FTP Folder Press Yes Press OK 251 Using NCP to ConnectRegistering an NCP Folder Specify the folder Press OK Press Exit 252Press NCP Select Connection Type 253 To locate the NCP folder using Browse NetworkTo locate the NCP folder manually Specify the folder Changing an NCP registered folder254 Press SMB, or FTP Confirmation message appears. Press Yes Deleting an NCP Folder255 Select a user of the folder you want to delete 256 Exit 257 Registering Names to a GroupRegistering a Group Press the title key under Select Title, if necessary Registering Names to a Group258 AB, CD, EF, GH, IJK, LMN, OPQ, RST, UVW, XYZ, 1 to 10… Press Add to Group Press Administrator Tools Press Address Book Management259 Select a group to which you want to add the name to Adding a Group to Another Group 260 Select the group which you want to add to Displaying Names Registered in a Group261 Press Programmed User/Group Removing a Name from a Group262 Select the group from which you want to remove the name Deleting a Group Within Another Group263 264 Select the group that you want to delete from Press the group key you want to change Changing a Group Name265 Press Yes Press a group key you want to delete Deleting a Group266 267 Registering a Protection CodeRegistering a Protection Code to a Single User 268 Press Destination or Sender under Use Name as Press Folder Destination under Protection Object Registering a Protection Code to a Group User269 270 Registering Smtp and Ldap AuthenticationSmtp Authentication 271 Ldap Authentication 272 273 274 275 Auto Color CalibrationColor Registration Press Español Changing the Display Language276 Press Salir Consumables Machine Maintenance/RepairInquiry Sales Representative 278 Press Exit twice 279 CounterDisplaying the Total Counter Press Counter 280 Specifications for the Main Unit Non-reproduction area Paper weightCopy paper size First copy time Paper capacity Reproduction ratioMaximum continuous copy run 283 Space for main unit W ⋅ D Power consumptionDimensions W ⋅ D ⋅ H up to exposure glass Noise emission 285 WeightHDD Auto Document Feeder Specifications for OptionsExposure Glass Cover Sheet Finisher 287 288 Booklet Finisher 289 290 Large Capacity Tray Punch Kit 3000-sheet Finisher / Booklet FinisherTray Paper Unit Bridge Unit NetBSD Information about Installed SoftwareExpat 293 Sablotron 294 Jpeg Library 295 MD4 SambaVer 297 Open SSL 298 299 300 301 302 Open SSH 303 304 305 306 307 Open Ldap 308 309 Index 310 311 312 313 314 315 Means Power ON. c means Stand by Operating Instructions General Settings Guide