Ricoh LD435c Edit, Front Margin Left / Right, Back Margin Left / Right, Front Margin Top / Bottom

Copier / Document Server Features

Edit

This section describes the user tools in the Edit menu under Copier / Document Server Features.

Default settings are shown in bold type.

Enter the width of the binding margin with the number keys as follows:

•Metric version: 0–30 mm (in increments of 1 mm)

•Inch version: 0"-1.2" (in increments of 0.1 inch)

3 Enter the width of the erased margin with the number keys as follows:

•Metric version: 2–99 mm (in increments of 1 mm)

•Inch version: 0.1"-3.9" (in increments of 0.1 inch)

An image of approximately 1.5 mm (0.06") will not be displayed as the width of the separation line, when specifying solid or broken lines.

❖Front Margin: Left / Right

Specify left and right margins on the front side of copies in Margin Adjust- ment mode.

•Left

•Right

Default:

•Metric version: Left 5 mm

•Inch version: Left 0.2"

❖Back Margin: Left / Right

Specify left and right margins on the back side of copies in Margin Adjust- ment mode.

•Left

•Right

Default:

•Metric version: Right 5 mm

•Inch version: Right 0.2"

❖Front Margin: Top / Bottom

Specify top and bottom margins on the front side of copies in Margin Adjust- ment mode.

•Top

•Bttm.

Default:

•Metric version: T / B: 0mm

•Inch version: T / B: 0.0"

100