Sansui HDLCD3200A owner manual Setting the picture size, Picture Size, Natural picture size

Setting the picture size

You can view 480i and 480p format programs in a variety of picture

sizes--NATURAL, CINEMA WIDE1,

CINEMA WIDE2, CINEMA WIDE3, and FULL.

Selecting the picture size Press MENU. Press 4 or _ to

select _ (SETUP) menu. Press A or V to select

"PICTURE SIZE".

2 Press 4 or _,. The PICTURE SIZE menu will appear. Press A! V or a Number button (0=4)

to select the desired picture size, as described below and on the

next page.

SETUP
CINEMA	MODE	FILM
ASPECT		OFF
SIGNAL	METER
AUTO	SHUT OFF	OFF
	PICTURE	SIZE
	0:NATURAL
	1 :CINEMA	WIDE1
	2:CINEMA	WIDE2
	3:CINEMA	WIDE3

[0-4] : SELECT

NOTE:

Some High Definition and/or Digital broadcasts may not allow you to change the picture size.

Press EXiT to return to the normal screen.

NOTE:

You can also display the PICTURE SIZE menu by pressing the PICTURE SiZE button on the remote control.

NATURAL picture size

In some cases, this image will display the size of standard 4:3 with a gray side bar.

CINEMA WIDE1 picture size (for 4:3 format programs)

To fill the screen, the right and left edges are extended, however; the center of the picture remains near its former ratio.

The top and bottom edges of the picture may be hidden.

29