Connections to other equipment
To connect the LCD TV to a Game
The LCD TV can also be used as a TV device for many video games. However, due to the wide variety of signals generated by these devices and subsequent
included in the suggested connection diagrams. You'llneed to consult each component's Owner's Manual for additional information.
Rear of the LCD TV
To AUDIO/VIDEO IN 1 (or 2)
TV GAME
To Audio/Video OUT
Audio/Video cord (not supplied)
To connect the LCD TV to a PC (Personal Computer)
Before you connect this LCD TV to your PC, change the adjustment of your PC's Resolution and Refresh rate (60 Hz).
Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to the VGA connector PC MONITOR on the back of the LCD TV. Attach the connectors firmly with the screws on the plug. In case of a Multimedia computer, connect the audio cord to the audio output of your Multimedia
computer and to the AUDIO connector of the PC/HDMI AUDIO IN jacks of the LCD TV. Press INPUT SELECT on the remote control to select PC mode.
Switch on the computer. The LCD TV can operate as the computer monitor.
Left side of the LCDTV |
|
|
|
| |
..............................: To PC IN |
| Monitor | Display modes |
| |
| PC | MODE | Resolution | Refresh rate | |
©_ | VGA | 640x480 | 60Hz | ||
| VGA | 720x400 | 70Hz | ||
To PC/ | 111 | ||||
WVGA | 848x480 | 60Hz | |||
HDMI | |||||
SVGA | 800x600 | 60Hz | |||
AUDIO |
| XGA | 1024x768 | 60 Hz | |
IN jack |
| ||||
| WXGA | 1280x768 | 60Hz | ||
|
| WXGA | 1280x720 | 60Hz |
VGA cable (not supplied) |
|
|
|
Audio cord (not supplied) | To return to | normal | mode |
| Press INPUT | SELECT | again. |
NOTES: |
|
|
|
•The
•When you select WXGA mode, see the WXGA INPUT to ON in the PC PICTURE menu (see page 41).
•If there is no video signal from the PC when the unit is in PC mode, "NO SIGNAl" will appear on the TV- screen.
16