Sansui HDLCD3200A owner manual TV operation, VHF/UHF/CABLE Channels

Models: HDLCD3200A

1 48
Download 48 pages 30.76 Kb
Page 20
Image 20

TV operation

1

2

To turn on the TV, press POWER.

Adjust the volume level by

pressing VOL + or -. The volume level will be indicated on the

screen by white bars. As the volume level increases, so do the number of bars. If the volume

decreases, the number of white bars also decreases.

3

4

Set the TV/CABLE menu option to the appropriate position (see page 18).

Press the Direct Channel

Selection (0=9,-) buttons to select the channel.

To select analog channels

 

ANT

When the TV/CABLE

menu option

.....

Aooo

is in the TV position,

all channels

......

12

can be instantly selected by using two buttons. (For example, to select channel 2, press "0", then "2". If you press only "2", channel selection will be delayed for a few seconds.)

For channels 10 and above, press the 2 digits in order.

When the TV/CABLE menu option is in the CABLE position, channels can be selected as follows:

1-9: Press 0 twice, then 1-9 as needed. Example, to select channel 2, press 002.

10-12: Press 0, then remaining 2 digits.

Example, to select channel 12, press 012.

13-99: Press the 2 digits in order.

Example, to select channel 36, press 36. 100-125: Press the 3 digits in order.

Example, to select channel 120, press 120.

To select digital channels

Press the channel number in order.

When "-" is contained in the channel number, Press the first 3 digits, then press "-/DISPLAY", followed by the remaining 3

digits.

(Example, to select channel 015-001, press 015 - 001 .)

If a channel is selected with only audio content, "AUDIO ONLY" will be displayed on the screen.

If a channel is selected with a weak digital signal, "DIGITAL

CHANNEL SIGNAL STRENGTH IS LOW" will be displayed on the screen.

If the digital channel has the same analog channel, you may be able to watch the same channel with analog.

If a channel is selected to which you have not subscribed, "DIGITAL CHANNEL IS ENCRIPTED" will be displayed on the screen.

NOTES:

If a channel with no broadcast is

selected, the sound will automatically be muted.

It may take a few seconds for a digital channel picture to appear on screen after being selected.

20

VHF/UHF/CABLE

CHANNELS

 

TV

 

CABLE

VHF

 

VHF

2-13

 

2-13

UHF

STD/HRC/IRC

14-69

14-36

(A) (W)

 

37-59

(AA) (WW)

 

60-85

(AAA) (ZZZ)

 

86-94

(86) (94)

 

95-99

(A-5) (A-1)

 

100-125 (100)(125)

 

01

(5A)

Page 20
Image 20
Sansui HDLCD3200A owner manual TV operation, VHF/UHF/CABLE Channels