To install a replacement SFP:
1.Make sure that the bail is in the unlocked position.
2.Orient the SFP with the appropriate port. See Figure 7 and Table 10.
scale: 3/8" = 1"
Reset
0 
23 
22 
21
20 
19 
18 
17 
!
2
B | ROCADE | h |
Switc |
|
bSAN
1
25201a
Figure 7 Installing an SFP
Table 10 SFP components
ItemDescription
1bail
2SFP
3.Insert the SFP into the port until you hear a click.
4.Close the bail.
Diagnostic tests
In addition to POST, Fabric OS 5.x includes diagnostic tests to help troubleshoot the hardware and the firmware including tests of internal connections and circuitry, fixed media, and the transceivers and cables in use.
Initiate diagnostic tests via the command line, using a telnet session or a terminal setup with a serial connection to the switch. Some tests require the ports to be connected by external cables to allow diagnostics to verify the serializer/deserializer interface, transceiver, and cable. For information on available diagnostic tests, type diagHelp.
All diagnostic tests are run at link speeds of 1 Gb/sec, 2 Gb/sec, and 4 Gb/sec.
44 | Managing the 4Gb SAN Switch |