HP Brocade 4Gb SAN c-Class BladeSystem Interpreting POST results

•The 4Gb SAN Switch obtains a domain ID and assigns port addresses

•Unicast routing tables constructed

•Normal port operation enabled

Interpreting POST results

To determine whether POST completed successfully and whether any errors were detected:

1.Verify that the 4Gb SAN Switch LEDs indicate all components are healthy. See Table 13 for description and interpretation of LED patterns. If one or more LEDs do not display a Healthy state, use the switchshow command to verify that the LEDs on the switch are not set to “beacon”.

2.Verify that the 4Gb SAN Switch prompt appears on the terminal of a computer workstation connected to the switch. If there is no switch prompt when POST completes, press Enter. If the switch prompt still does not appear, try opening another telnet session or another management tool. If this is not successful, the 4Gb SAN Switch did not successfully complete POST; contact HP.

3.Review the switch system log for errors. Any errors detected during POST are written to the system log, accessible through the errshow command.

For information about all referenced commands and accessing the error log, refer to the latest version of the HP StorageWorks Fabric OS administrator guide. For information about error messages, refer to the Fabric OS system error messages reference manual.

50 Managing the 4Gb SAN Switch