Miller Electric 6000 manual Optional Generator Power Panels, Generator Power Panel 495

7-2. Optional Generator Power Panels

Generator Power Panel 495 315		Generator Power Panel 495 219
	(USA)	(USA)

Generator Power Panel 495 278	Generator Power Panel 495 253		Generator Power Panel 495 288
(Canada−CSA)		(South Africa)	(South America)

Generator Power Panel 495 289	Generator Power Panel 495 290	Generator Power Panel 495 283
(Australia)	(Europe)	(S.E. Asia)

Ref. ST-802 124 / H-495 290 / H-495 283 / 495 277

YIf unit does not have GFCI recep- tacles, use GFCI-protected exten- sion cord.

YPower may still be present at a re- ceptacle when a circuit breaker trips.

Unplug power cord before attempt- ing to service accessories or tools.

.Generator power decreases as weld current increases.

Set Amperage control at max. for full generator power.

.Place throttle lever in Run position (far right) for generator power.

Circuit breakers protect the generator from overload.

.Press button to reset circuit breaker. If breaker continues to open, contact Factory Authorized Service Agent.

OM-499 Page 22 Return To Table Of Contents