Canon X600, SX60 Format IMAGEFLIP=Image flip setting parameters ：ＩＤ, Imageflip=Rear

User Command Specifications 9. Details of command IMAGEFLIP

1

Commands	IMAGEFLIP				Mode	Control	Setting	Reference
Function	Flip display
Format		IMAGEFLIP=<Image flip setting parameters ：ＩＤ>
Parameter Image flip setting parameters
		Parameter	Meaning	Remarks
		NONE	None
		CEILING	Ceiling	Flip horizontally
		REAR	Rear	Flip vertically				ID
		REAR_CEILING	Rear ceiling	Flip horizontally and vertically

The parameters which can be set at any given point in time can be obtained using the

RANGE command.

For details, refer to the RANGE command.

Response "i:OK" is returned if the parameter was set properly.

For all other responses, refer to "Error List."

Description This command is used to flip the screen display in various ways (vertically or horizontally).

-1 It can be executed when the projector is in both the remote mode and power-onstatus at the same time.

A "busy" response is given while the zoom or focus lens is being driven. (Refer to the ZCONTDRV command and FCONTDRV command.)

-2 This command is the same as the menu functions in the table below. Model Menu

SX50 [Display settings] - [Flip display]

SX6

SX60 [Display settings] - [Flip display]

X600

-3 When the display is flipped, the "keystone distortion" settings are initialized (set to HKS:0, VKS:0).

-4 The current flip display status can be acquired using the applicable GET command. For details, refer to the GET command.

Example Setting
> IMAGEFLIP=REAR	This displays the image backwards (flip
< i:OK	vertically) on the screen.

Reference

> GET IMAGEFLIP or ?IMAGEFLIP	This retrieves the flip display state.
< g:IMAGEFLIP=REAR_CEILING

Acquisition of parameters which can be set

> RANGE IMAGEFLIP

<r:IMAGEFLIP=I,NONE,CEILING,REAR,REAR_CEILING "NONE," "CEILING," "REAR" or "REAR CEILING" can be selected as the flip display setting.

*Commands are indicated by ">", and responses are indicated by "<".

Commands	SX50	SX6	SX60	X600
supported	01.00**	01.01**	01.01**	01.01**
	○	○	○	○

Supported Command States

Model

Power

Input

Mode

Remarks

OFF

ON

PM

D-RGB

A-RGB1

A-RGB2

Comp

Video

S-Video

D-Video

SCART

None

Remote

Local

SX50

×

○

×

○

○

○

○

○

○

–

–

○

○

×

SX6

×

○

×

○

○

○

○

○

○

○

○

○

○

×

SX60

X600

*If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.

*"i:BUSY" may be returned if the power status is being switched.

PAGE 52