Canon X600, SX60 specifications Example, Range Rgbgain

User Command Specifications ９．Details of command RGBGAIN

Commands

RGBGAIN

Mode

Control

Setting

Reference

Function

RGB gain adjustment

Format

RGBGAIN=<R gain setting：Number>▽<G gain setting：Number>▽<B gain setting：Number>

Parameter

RGB gain settings (from -20 to 20 for each value)

The RANGE command can be used to obtain the parameter range that can be set at that time.

Number

For details, refer to the RANGE command.

Response

"i:OK" is returned if the parameter was set properly.

For all other responses, refer to "Error List."

Description

This command is used to adjust the gain of the R, G and B colors.

(1) It can be executed when the projector is in both the remote mode and power-onstatus at the same

time.

However, a "busy" response is given while the zoom or focus lens is being driven.

（ Refer to the ZCONTDRV command and FCONTDRV command. ）

(2) This command functions in the same way as when "Image adjustments" - "Color adjustments" -

"Red/green/blue gain" are selected on the menu.

(3) This sets the currently selected input signal and image mode.

(4) The current RGB gain values can be obtained using the GET command.

For details, refer to the GET command.

Example

Setting

> RGBGAIN=10, 11, 12

The R gain is set to 10, G gain to 11 and B gain to 12.

< i:OK

Reference

> GET RGBGAIN or ?RGBGAIN

The RGB gain values are obtained.

< g:RGBGAIN=-10, 0, 19

Obtain settable parameter range (Min, Max)

> RANGE RGBGAIN

< r:RGBGAIN=N,-20,20,-20,20,-20,20

A number from -20 to 20 can be set for each color as

the RGB gain values.

*Commands are indicated by ">", and responses are indicated by "<".

Commands

SX50

SX6

SX60

X600

supported

０１．００**

０１．０１**

０１．０１**

０１．０１**

×

○

○

○

When a command is not supported, "e:0002 INVALID_COMMAND" is returned.

Supported Command States

Model

Power supply

Input

Mode

Remarks

OFF

ON

PM

D-RGB

A-RGB1

A-RGB2

Comp

Video

S-Video

D-Video

SCART

None

Remote

Local

SX50

－

－

－

－

－

－

－

－

－

－

－

－

－

－

SX6

×

○

×

○

○

○

○

○

○

○

○

○

○

×

SX60

X600

*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response. *When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.

PAGE 40