Canon X600, SX60 specifications Pjon=Canon

User Command Specifications 9. Details of command PJON

1

Commands	PJON			Mode	Control	Setting	Reference
Function	Display screen at startup setting
Format		PJON=<Parameters for setting display screen at startup;ＩＤ>
Parameter Parameters for setting display screen at startup
		Parameter	Meaning
		CANON	Canon logo
		SKIP	No display
		LOGO	User screen				ID

The parameters which can be set at any given point in time can be obtained using the

RANGE command.

For details, refer to the RANGE command.

Response "i:OK" is returned if the parameter was set properly.

For all other responses, refer to "Error List."

Description This sets the screen displayed at startup.

-1 It can be executed when the projector is in both the remote mode and power-onstatus at the same time.

A "busy" response is given while the zoom or focus lens is being driven. (Refer to the ZCONTDRV command and FCONTDRV command.)

-2 This command is the same as the menu functions in the table below.

Model Menu

SX50 [Display settings] - [User screen settings] - [Screen at startup]

SX6

SX60 [Display settings] - [User screen settings] - [Screen at startup]

X600

-3 To select the user screen (LOGO), the user image must be registered ahead of time. (If the user image is not registered, "e:1002 NO_LOGO_CAPTURED" is returned.)

-4 The GET command can be used to obtain the current screen displayed at startup. For details, refer to the GET command.

Example Setting
> PJON=CANON	This sets the startup screen to “Canon logo”.
< i:OK
Reference
> GET PJON or ?PJON	This retrieves the startup screen.
< g:PJON=SKIP

Acquisition of parameters which can be set

> RANGE PJON"CANON," "SKIP" or "LOGO" can be set for the display

screen at startup.

<r:PJON=I, CANON, SKIP, LOGO

*Commands are indicated by ">", and responses are indicated by "<".

Commands	SX50	SX6	SX60	X600
supported	01.00**	01.01**	01.01**	01.01**
	○	○	○	○

Supported Command States

Model

Power

Input

Mode

Remarks

OFF

ON

PM

D-RGB

A-RGB1

A-RGB2

Comp

Video

S-Video

D-Video

SCART

None

Remote

Local

SX50

×

○

×

○

○

○

○

○

○

–

–

○

○

×

SX6

×

○

×

○

○

○

○

○

○

○

○

○

○

×

SX60

X600

*If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.

*"i:BUSY" may be returned if the power status is being switched.

PAGE 54