Canon SX60, X600 specifications Memcadj, Example Control

User Command Specifications ９．Details of command MEMCADJ

Commands	MEMCADJ			Mode	Control	Setting	Reference
Function	Memory color adjustment
Format		MEMCADJ=<Memory color adjustment parameter：ＩＤ>
Parameter	Memory color adjustment parameters
		Parameter	Meaning
		OFF	No adjustment
		MEM_L	Low memory color adjustment
		MEM_M	Medium memory color adjustment				ID
		MEM_H	High memory color adjustment
	The parameters which can be set at any given point in time can be obtained using the
	RANGE command.
	For details, refer to the RANGE command.
Response	"i:OK" is returned if the parameter was set properly.
	For all other responses, refer to "Error List."
Description	This command is used to select no adjustment (OFF), low (MEM_L), medium (MEM_M) or high (MEM_H) as
	the memory color adjustment setting.

(1)It can be executed when the projector is in both the remote mode and power-onstatus at the same time.

However, a "busy" response is given while the zoom or focus lens is being driven.

（Refer to the ZCONTDRV command and FCONTDRV command. ）

(2)This command functions in the same way as when "Image adjustments" - "Memory color adjustment" are selected on the menu.

(3)This sets the currently selected input signal and image mode.

(4)The current memory color adjustment setting can be obtained using the GET command. For details, refer to the GET command.

Example Control

> MEMCADJ=MEM_M

The color adjustment is set to “Medium memory color

< i:OK

adjustment”.

Reference

> GET MEMCADJ or ?MEMCADJ

The memory color adjustment level is obtained.

< g:MEMCADJ=MEM_M

Acquisition of parameters which can be set

> RANGE MEMCADJ

< r:MEMCADJ=I,OFF,MEM_L,MEM_M,MEM_H

No adjustment (OFF), low (MEM_L), medium (MEM_M)

or high (MEM_H) can be set for the memory color

adjustment.

*Commands are indicated by ">", and responses are indicated by "<".

Commands

SX50

SX6

SX60

X600

supported

０１．００**

０１．０１**

０１．０１**

０１．０１**

×

○

○

○

When a command is not supported, "e:0002 INVALID_COMMAND" is returned.

Supported Command States

Model

Power supply

Input

Mode

Remarks

OFF

ON

PM

D-RGB

A-RGB1

A-RGB2

Comp

Video

S-Video

D-Video

SCART

None

Remote

Local

SX50

－

－

－

－

－

－

－

－

－

－

－

－

－

－

SX6

×

○

×

○

○

○

○

○

○

○

○

○

○

×

SX60

X600

*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response. *When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.

PAGE 43