Canon 30D28135, 30D1785 manual Checking the Image After it is Taken, From the Menu, select Review

Check the Image Immediately

Checking the Image After it is Taken

You can set the camera to display each image on the LCD monitor as soon as it is taken. You can do this two ways: Select [On] to display the image by itself, or select [On (Info)](→104) to display the image with its recording information. Select [Off] if you do not want to display the image. The default setting is [On].

1	From the Menu, select [Review].
	● Press the 〈MENU〉 button.
	● Turn the 〈	〉 dial to select [Review], then
	press the 〈	〉 button.

2	Select the Review setting.
	● Turn the 〈 〉 dial to	select the desired
	option, then press the 〈	〉 button.

The setting is entered, and the display returns to the menu.

● Press the 〈MENU〉 button to clear the screen and exit the menu.

Take the picture.

3 After the picture is taken, the image as it was shot appears on the LCD monitor.

The time that image is displayed depends on the review time setting. (→46)

● The display differs depending on whether you selected [On] or [On (Info)].

[On] selected [On (Info)] selected (→104)

Histogram (→104)

Image information (→104) Date/time (→38)

You can change the review time setting. (→46)

2

Simple Picture Taking

45