Canon 30D28135 manual Inserting the Battery Pack, Battery Charge Remaining Icons, Close the cover

Inserting and Removing the Battery Pack

Inserting the Battery Pack

Load a fully charged BP-511 battery pack into the camera.

1	Open the battery chamber cover.
	● Slide the lever in the direction shown by the
	arrow in the diagram, and open the cover
	as shown.
2	Load the battery into the camera.
	● Make sure the battery pack is facing the
	right way, and insert it into the battery
	chamber.
	● Insert the battery pack until it locks into
	place.
3	Close the cover.
	● Press the cover closed until it clicks shut.

Battery Charge Remaining Icons

The level of charge remaining is shown in three stages when the Main Switch is set to 〈 ON 〉. (→33)

: Charge is sufficient.

: Charge is low.

: Battery pack must be charged.

If the level of charge remaining runs out when you are using the menu screen or playing back an image, a no battery warning appears on the LCD monitor. When this occurs, remove the battery and charge it.

1

Before You Begin

27